Epson TM-T20II Users Manual Software - Page 71
Automatic Paper Cut Settings
View all Epson TM-T20II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
TM-T20II Software Installer Software User's Manual TM-T20II Utility B Configure the following items referring to the preview on the right portion of the screen. Note: Settings other than Extra Upper Space Reduction and Extra Lower Space Reduction are disabled due to the Advanced Printer Driver being in graphics mode. Setting Extra Upper Space Reduction Extra Lower Space Reduction Line Space Reduction Rate Line Feed Reduction Rate Barcode Height Reduction Rate Description Selects whether to reduce the upper margin or not. Enable this to cut out the extra upper margin that is created before the first print data is printed. Selects whether to reduce the lower margin or not. Enable this to cut out the lower margin that is created from the time the last line is printed until the paper is automatically cut. Selects a reduction ratio of line spacing during printing. The minimum pitch is two dots. If reduction results in a line spacing of less than 2 dots, the line spacing will be reset to 2 dots. Selects a reduction ratio of line spacing of blank lines. This setting is ignored for the portion set to be cut out by the Extra Upper Space Reduction setting. When you advance the paper by inserting line feeds in order to cut the paper manually, you may not be able to advance the paper until the last line reaches the cut position because of this reduction setting. Selects a reduction ratio of barcode height. The barcode height cannot be reduced to less than 30-dots height. This setting can cause the barcode size to fall outside the barcode standards. C Click the Set button. The settings are reflected to the printer. Automatic Paper Cut Settings Allows you to configure whether to cut paper and print a logo when the cover is closed. 71