Epson SQ-850 User Manual - Page 208
The position of the, printout is not, what you expected., 10 Troubleshooting
![]() |
View all Epson SQ-850 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
Printing Problem The position of the printout is not what you expected. Solution Text is printed on the same line. A line feed signal is not being sent at the end of each line of text. Check the AUTO LINE FEED setting in SelecType, and set it to on. Refer to 3-11. Text is printed with an extra blank line in between. Two line feed signals are probably being sent. Check the AUTO LINE FEED setting in SelecType and sent it to off. Refer to 3-11. Text is printed with Your interface cable may not be an extra blank line in configured correctly. Discable the AUTO - between, even after FEED XT signal of your interface. setting the auto line feed setting to off. Printing starts too high or too low on the Page. The loading position may be set up incorrctly. Use micro-adjustment to adjust the loading position. Refer to 3-21. If the problem persists, check the top margin set by your application software are adjust it if necessary. 7-10 Troubleshooting
![](/manual_guide/products/epson-sq850-user-manual-41857a9/208.png)