Epson Pro L12000Q Users Guide - Page 167

Setting the Remote Control ID Parent topic: Using Multiple Projectors Setting the Projector ID If you want to control multiple projectors from a remote control, give each projector a unique ID. 1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Multi-Projection setting and press Enter. 4. Select Projector ID and press Enter. 5. Press the left or right arrow buttons on the remote control to select the identification number you want to use for the projector. Then select Set and press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Note: To temporarily display the projector's ID number on the screen, hold down the i button and press the ID button. Parent topic: Projector Identification System for Multiple Projector Control Setting the Remote Control ID The remote control's ID is set to 0 by default so it can operate any compatible projector. If you want to set the remote control to operate only a particular projector, you need to set the remote control's ID to match the projector's ID. 1. Turn on the projector you want the remote control to operate with exclusively. 167