Epson Powerspan User Manual - Page 33
Running the SETUP Program, SETUP program options continued
View all Epson Powerspan manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
SETUP program options (continued) Settings Description Onboard FlOPPY Diskette A Diskette B Enabled * Disabled 5.25". 360 KB 5.25" 1.2 MB 3.5", 720 KB 3.5": 1.44 MB (A*) 3.5", 2.88 MB Not Installed (B*) Set to Enabled to use the built-in diskette drive controller; set to Disabled to disable the built-in controller if you are either not using a diskette drive or will use a controller on an option card Set to the type(s) of diskette drive(s) installed in the system; set to Not Installed if you do not have the specified drive installed Onboard IDE Enabled Disabled * Hard Drive 1 Hard Drive 2 Type nn Not Installed l Set to Enabled to use the built-in IDE hard disk drive controller to control your IDE drive(s); set to Disabled to use an external IDE drive controller (1) Set to the hard disk drive type of the specified IDE hard disk drive or enter parameters for user-definable drive type according to the drive's documentation; select the user-defined drive type number you want to use in the option described below; select Not Installed for both options if you have installed a SCSI hard disk drive. (For more information, see "Hard Disk Drive Types" on page 2-12.) User Definable 2 and 3 * Drives 48 and 49 Select the pair of user-definable drive types you want to use to enter your drive's parameters; select the type and enter the parameters using the option described above Running the SETUP Program 2-5