Epson Powerspan User Manual - Page 29
CHAP 2-RUNNING THE SETUP PROGRAM, before configuring your system.
![]() |
View all Epson Powerspan manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Chapter 2 Running the SETUP Program The SETUP program allows you to configure your computer and set many different system options. You should use SETUP to configure your computer in the following situations: Cl You did not install any option cards or installed only ISA option cards that did not come with configuration (CFG) files Q You do not have a diskette drive or have disabled your diskette drive. If you have installed EISA option cards, you should run the EISA Configuration utility instead of the SETUP program to configure your system. See Chapter 3 for more information. Note If you plan to operate your computer without either a monitor, keyboard, or diskette drive, see "Using Special Configurations" in Chapter 4 before running SETUP or the EISA Configuration utility. If you'll be redirecting your computer's input and output to a serial port, be sure to see "Operating Your Computer from a Remote Location" in Chapter 4 before configuring your system. Your computer's SETUP program is stored in the system BIOS ROM. You can run SETUP whenever you turn on or reset the computer, regardless of whether you have installed an operating system. Note Any settings you make using the EISA Configuration utility override those you set using SETUP. Running the SETUP Program 2-1
![](/manual_guide/products/epson-powerspan-user-manual-53074c2/29.png)