Epson PowerLite EB-L210SW Users Guide - Page 183
Transferring Settings from a USB Flash Drive, Caution, Parent topic, pjconfdata.bin
![]() |
View all Epson PowerLite EB-L210SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 183 highlights
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop flashing, the projector turns off. Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This could damage the projector. 5. Remove the flash drive. Note: The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file name, add text after PJCONFDATA using only alphanumeric characters. If you change the PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly. Parent topic: Copying Menu Settings Between Projectors Transferring Settings from a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the same model. Note: Make sure the USB flash drive contains only a single settings transfer from another projector of the same model. The settings are contained in a file called pjconfdata.bin. If the drive contains other files, the transfer may not complete correctly. Do not adjust image settings on a projector until after you transfer settings to it. Otherwise, you may have to repeat your adjustments. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 183
![](/manual_guide/products/epson-powerlite-ebl210sf-users-guide-ab0737a/183.png)