Epson Mobilink TM-P80II Technical Reference Guide - Page 42
Installing or Replacing the Roll Paper, Remove the used roll paper core if any.
View all Epson Mobilink TM-P80II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Chapter 2 Setup Installing or Replacing the Roll Paper Follow the steps below to install or replace the roll paper. • Be careful not to touch the manual cutter when installing or removing the roll paper. The manual cutter may injure your hand. • Make sure you use a specified roll paper type. • Before installing the roll paper, take up any slack in the roll paper by pulling its leading edge. If you install a slack roll paper, a paper jam or print quality problems may occur. • Before installing the roll paper, make sure that the roll paper is not deformed. Using a deformed roll paper will cause the printer to malfunction. 1 Open the roll paper cover. U"How to Open the Roll Paper Cover" on page 40 2 Remove the used roll paper core if any. 3 Install the roll paper in the correct direction. 4 Pull out some paper, and close the roll paper cover. U"How to Close the Roll Paper Cover" on page 41 42