Epson LightScene EV-100 Quick Setup - Page 3
Using web remote, Using the Epson iProjection app, Managing content
View all Epson LightScene EV-100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
5 Select the Wired LAN menu and press . Using the Epson iProjection app You can project wirelessly from a mobile device (iOS or Android™) using the Epson iProjection™ app and a QR code. 1 Use the following QR code to download and install the Epson iProjection app. 6 Choose IP Settings and press . 7 If your network assigns addresses automatically, make sure the DHCP setting is on. If not, make sure DHCP is off and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. Then press Esc. 8 To prevent the IP address from appearing on the network standby screen, set the IP Address Display setting to Off. 9 When you are finished, select Complete and press , then press again to save your settings. 10 Press the Menu button to exit the menu system. Using web remote You can use a standard web browser to control the projector through the network. A virtual remote control on your computer screen lets you perform many of the same functions as you can with the physical remote control. 1 Open your web browser and enter the IP address of the projector you want to monitor in the browser's address box. If you're not sure what the IP address of the projector is, turn the projector on and select Net. Info. - Wired LAN or Net. Info. Wireless LAN from the Network menu to display the IP address of the projector. (Do not enter the leading zeroes.) 2 Enter EPSONWEB as the user name and admin as the password, then click OK. The Epson® Web Control menu opens. 3 Select Remote. Use the on-screen buttons to operate the projector, as you would using the remote control. Select image source Turn off picture and sound Select a saved playlist Adjust volume Add overlay effect to image 2 Connect your mobile device to the same wireless network your projector is connected to. 3 Press the Menu button on the remote control, select the Network menu, and select Display the QR Code to display a QR code. 4 Start Epson iProjection on your mobile device. 5 Use the QR code reader feature to read the QR code displayed. 6 Follow the app instructions to connect your device to the projector. For more information on setting up and using this app, visit www.epson.com/projectorapp (U.S.) or www.epson.ca/projectorapp (Canada). Managing content You can manage content from your computer using the Epson Projector Content Manager software (Windows®), or over the network using a web browser (Epson Web Control) or the Epson iProjection app. Note: An SD card is required for managing content. Epson Projector Content Manager Create and edit playlists and apply effects and filters √ Create custom filters √ Create and edit timetable √ Save project on an SD card √ Convert video files √ Upload video and picture files over a network Control projector over a network Web Browser/ Epson iProjection √ √ √ Using the Content Manager software The Epson Projector Content Manager software allows you to add images and movies to playlists and save them directly to an SD card. You can easily project your playlist content by inserting the SD card into your projector's card slot. Note: Download and install the Epson Projector Content Manager software from your product's support page (see "Where to get help"). For more information, see the online Epson Projector Content Manager Operation Guide or the online User's Guide.