Epson LQ-590IIN Network Guide - Page 50

Solving Problems, Checking the Log for Server and Network Device, Printing a Network Status Sheet

Page 50 highlights

Network Guide Solving Problems Solving Problems Checking the Log for Server and Network Device If trouble occurred in the network connection, you may be able to identify the cause by checking the log for the mail server or the LDAP server or the status by using the system log for the network device, such as a router, or commands. Printing a Network Status Sheet You can print out and check detailed network information. A Load paper. B Hold down the Status sheet button for about three seconds. The network status sheets are printed. Initializing the Network Settings Restoring the Network Settings from the Printer You can restore network settings to their defaults. A Turn off the printer. B Hold down the Status sheet button while turning on the printer. Restoring the Network Settings using EpsonNet Config You can restore network settings to their defaults by using EpsonNet Config. A Start EpsonNet Config. 50

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60

Solving Problems
Checking the Log for Server and Network Device
If trouble occurred in the network connection, you may be able to identify the cause by checking the log for the mail
server or the LDAP server or the status by using the system log for the network device, such as a router, or commands.
Printing a Network Status Sheet
You can print out and check detailed network information.
A
Load paper.
B
Hold down the Status sheet button for about three seconds.
The network status sheets are printed.
Initializing the Network Settings
Restoring the Network Settings from the Printer
You can restore network settings to their defaults.
A
Turn off the printer.
B
Hold down the Status sheet button while turning on the printer.
Restoring the Network Settings using EpsonNet Config
You can restore network settings to their defaults by using EpsonNet Config.
A
Start EpsonNet Config.
Network Guide
Solving Problems
50