Epson LQ-590II Users Guide - Page 99
Pitch, Tear Off/Bin
View all Epson LQ-590II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
LQ-590II/LQ-590IIN/LQ-2090II/LQ-2090IIN User's Guide Button Menu (Pitch and Tear Off/Bin) buttons ItemD button ItemU button Set button Basic function Enters or exits the Default Setting mode. Selects the next menu parameter. Selects the previous menu parameter. Changes the value in the selected menu. Follow these steps to enter the Default Setting mode and change the printer's default settings: Note: ❏ Before entering the Default Setting mode, you need to load A4 or letter size single-sheet paper or continuous paper that is at least 210 mm (8.3 inches) wide. See "Loading Continuous Paper" on page 21 and "Loading Single Sheets" on page 44 for instructions on loading continuous paper and single sheets. ❏ If you use single sheets, you need to load a new sheet of paper each time the printer ejects a printed sheet from the sheet guide. ❏ For your safety, Epson recommends operating the printer with the printer cover closed. The printer will function with the printer cover opened or removed, but maximum safety and print speed are achieved when the cover is closed. ❏ If you turn off the printer prior to exiting Default Setting mode, any changes you may have made are canceled and not saved. 1. Make sure paper is loaded. 2. Press the Menu (Pitch and Tear Off/Bin) buttons until the printer beep once and the Menu lights (both the Tear Off/Bin lights) turn on. The printer enters the Default Setting mode and prints a message prompting you to select the language for the Default Setting menu. The language which is underlined indicates the current setting. 3. If the language you want is not selected, press the ItemD (Font) button until the printout indicates the language you want. Note: You cannot change the language by the ItemU (Pitch) button. 4. Press the Set (Tear Off/Bin) button to select the desired language. Control Panel 99