Epson ET-7700 Users Guide - Page 213
Power Cleaning, Power Cleaning Using the Product Control Panel, Related topics, Caution, Parent topic
View all Epson ET-7700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Related topics Loading Paper Power Cleaning If you still see white or dark lines or missing nozzles in your printouts, even after cleaning the print head several times, you can run a Power Cleaning. If you do not see improvement after running a Power Cleaning, turn off the product and wait at least 12 hours before running another Power Cleaning. Caution: Running a Power Cleaning consumes a lot of ink, so you should run it only if necessary. Make sure each ink tank is at least one-third full before running a Power Cleaning, or it may damage the product. Caution: Power Cleaning may cause the ink pads to reach their capacity sooner. When an ink pad reaches the end of its service life, the product stops printing and you must contact Epson for support. Power Cleaning Using the Product Control Panel Power Cleaning Using a Computer Utility Parent topic: Print Head Maintenance Power Cleaning Using the Product Control Panel You can run a Power Cleaning using the control panel on your product. Note: After a Power Cleaning, you must turn off the product and wait at least 12 hours before running another Power Cleaning. 1. Turn off the product. 2. Visually check the ink levels and make sure each ink tank is at least one-third full. Caution: If you run a Power Cleaning when the ink levels are low, you may damage the product. 3. Hold down the power button, the OK button, and the down arrow button at the same time until the Power Cleaning screen appears. 4. Follow the on-screen instructions to run the Power Cleaning. 5. When Power Cleaning is finished, run a nozzle check. Parent topic: Power Cleaning 213