Epson ET-2650 Users Guide - Page 37
Enabling Wi-Fi Direct Mode, Wi-Fi Setup, Wi-Fi Direct, Parent topic
View all Epson ET-2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Enabling Wi-Fi Direct Mode You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or other devices without a wireless router or access point. 1. Press the home button, if necessary. 2. Press the arrow buttons to select Wi-Fi Setup and press the OK button. 3. Press the right arrow button to select Wi-Fi Direct and press the OK button. 4. Press the OK button three more times. You see this screen: 5. Press the OK button to complete setup. You see the icon on the LCD screen and should be able to connect to your product directly from your computer or device, and then print. If you are printing from a computer, make sure you installed the network software as described on the Start Here sheet. Note: Make a note of the SSID and password that appear. If you want to change the password, see the link below. If the icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat these steps to try again. Changing the Wi-Fi Direct Mode Password Parent topic: Wi-Fi Direct Mode Setup 37