Epson ET-2600 Users Guide - Page 109
Running a Product Check, Resetting Network Settings, Solving Problems, Print Head Cleaning - wifi not working
View all Epson ET-2600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Running a Product Check Running a product check helps you determine if your product is operating properly. 1. Press the power button to turn off the product. 2. Disconnect any interface cables connected to your product. 3. Load plain paper in the product. 4. Hold down the stop button and press the power button to turn on the product. 5. When the product turns on, release both buttons. The product begins printing a nozzle check pattern. 6. Do the following, depending on the results of the product check: • If the page prints and the nozzle check pattern is complete, the product is operating properly. Any operation problem you may have could be caused by your computer, cable, software, or selected settings. Check the other solutions in this manual or try uninstalling and reinstalling your printer software. • If the page prints but the nozzle check pattern has gaps, clean or align the print head. • If the page does not print, the product may have a problem. Check other available solutions. If they do not work, contact Epson. Parent topic: Solving Problems Related concepts Print Head Cleaning Print Head Alignment Uninstall Your Product Software Related references Where to Get Help Resetting Network Settings You can reset the network settings to their factory defaults. 1. Turn the printer off. 2. Press and hold the network status button, then press and hold the power button until the green and orange WiFi lights flash alternately. Network settings are reset when the green and orange WiFi lights turn off. 109