Denon AVR 4308 Owners Manual - Page 21

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting USB Port n Front panel USB memory device n Rear panel USB memory device XM connector • The AVR-4308CI is an XM Ready® receiver. You can receive XM® Satellite Radio by connecting to the XM Mini-Tuner and Home Dock (includes home antenna, sold separately) and subscribing to the XM service. • Plug the XM Mini-Tuner and Home Dock into the XM connector on the rear panel. • Position the Home Dock antenna near a south-facing window to receive the best signal. For details, see "Listening to XM Satellite Radio Programs" (vpage 49, 50). When making connections, also refer to the operating instructions of the XM Mini-Tuner and Home Dock. XM Mini-Tuner and Home Dock XM • In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel. • To change the port to be used, see "USB Select" on page 40. • For instructions on playing the files on a USB memory device, see page 56, 57. NOTE • Set to the USB port you want to use. • The AVR-4308CI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memory devices connected to both the ports at the same time. Select the USB port you want to use at the "Source Select" - "NET/ USB" - "Playback Mode" - "USB Select" menu. NOTE Keep the power cord unplugged until the XM Mini-Tuner and Home Dock connection have been completed. • The XM name and related logo are registered trademarks of XM Satellite Radio Inc. All rights reserved. • XM Ready is a registered trademark of XM Satellite Radio Inc. All rights reserved. 18