Denon AVR-1611 Owners Manual - English - Page 45

ENGLISH Input Setup Setting items Component Set this to change the component video input connectors assigned to the input sources. BD DVD SAT/CBL V.AUX DOCK TV GAME Setting details Comp1 (Component video) None : Do not assign a component video input connector to the selected input source. • At time of purchase, the settings of the different input sources are as shown below. Input source BD DVD TV SAT/ CBL GAME V.AUX DOCK Default setting None None None Component 1 None None None Setting items Video Mode Make settings for video processing. BD z DVD TV z SAT/CBL GAME z V.AUX DOCK Setting details Auto : Process video automatically based on the HDMI content information. Movie : Process video normally. Game : Always process video appropriate for game content. • If "Video Mode" is set to "Auto", the mode is switched according to the input contents. • If a source is played in both MAIN ZONE (audio and video) and ZONE2 (audio only) modes in the same room, audio in MAIN ZONE and ZONE2 modes may sound out of synchronization, but this is not malfunction. In this case, setting to "Game" mode may improve audio synchronization. Default The "Input Assign" settings are returned to the default settings. • An input source to which an component video input connector cannot be assigned is displayed as "-". • Even if a component input connector is assigned to the input source "DOCK", "DOCK" is effective when a control dock for iPod is connected. Yes : Reset to the defaults. No : Do not reset to the defaults. If you select "Default" and press ENTER, the message "Default Setting?" is displayed. Select "Yes" or "No", and then press ENTER. Video Default settings are underlined. Set the source video. zz"BD", "TV" or "GAME" can be set when "HDMI" (vpage 41) or "Component" (vpage 42) has been assigned. Setting items Video Select Video of another input source is played back combined with the playing audio. Setting details Source : Play the picture and sound of the input source. BD / DVD / TV / SAT/CBL / GAME / V.AUX / DOCK : Select video input source to view. This can be set for individual input sources. "BD", "TV" and "GAME" can be selected only when a component video connector is assigned as an input source. NOTE • It is not possible to select HDMI input signals. • Input sources for which "Delete" is selected at "Source Delete" (vpage 53) cannot be selected. Input Mode Default settings are underlined. The input modes available for selection may vary depending on the input source. Setting items Input Mode Set the audio input modes for the different input sources. Setting details Auto : Automatically detect input signal and perform playback. HDMI : Play only signals from HDMI input. Digital : Play only signals from digital input. Analog : Play only signals from analog input. Decode Mode Set the decode mode for input source. BD DVD SAT/CBL GAME V.AUX TV DOCK • "HDMI" can be set for input sources for which "HDMI" is assigned at "Input Assign" (vpage 41). • "Digital" can be set for input sources for which "Digital" is assigned at "Input Assign" (vpage 41). • If the input source is set to "TV" or "Game", it cannot be set to "Analog". • When digital signals are properly input, the indicator lights on the display. If the indicator does not light, check the digital input connector assignment and the connections. • If "HDMI Control" is set to "ON" and a TV compatible with the ARC is connected via the HDMI MONITOR connectors, the input mode whose input source is "TV" is fixed to ARC. Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This item can be set for input sources for which "HDMI" or "Digital" is assigned at "Input Assign" (vpage 41). • Normally set this mode to "Auto". Set "PCM" and "DTS" when inputting the corresponding input signal. 42 Remote control operation buttons Move the cursor (Up/Down/Left/Right) Confirm the setting Return to previous menu