Dell PowerEdge M1000e Fabric OS Release Notes - Page 20
Fabric OS v6.4.1 Release Notes v1.0, of 62
![]() |
View all Dell PowerEdge M1000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
FOS Features (supported in interopmode 0) FOS v6.4 IM = Interopmode IM 2 IM 3 Adaptive Networking: QoS No No Adaptive Networking: Ingress Rate Limiting No* No* Advanced Performance Monitoring (APM) No* No* APM: TopTalkers No* No* Admin Domains No No Secure Fabric OS5 N/A N/A Fabric Watch Yes Yes Ports on Demand (POD) Yes Yes NPIV Yes Yes Timer Server function (NTP) No No Open E_Port6 N/A N/A Broadcast Zoning No No FDMI No No Remote Switch No No Port Mirroring Yes Yes Extended Fabrics Yes Yes7 Alias Server No No Platform Service No No FCIP (VE_Ports) Yes Yes IPFC (IP over FC) Yes8 Yes8 M-EOS ALPA 0x13 configuration Yes Yes VE to VEX Port Yes Yes Integrated Routing9 Yes9 Yes Domain Offset Support Yes Yes 239 Domain Support (available on Mi10k only) N/A Yes Masterless F_PORT Trunking (AG connect to FOS switches only) Yes Yes FC10-6-to-FC10-6 ISL Yes Yes RASLOG Events on duplicate WWNs Yes Yes Virtual Fabrics Yes Yes Logical Fabric using LISLs (XISLs in Base Fabric) No No Port Fencing Yes Yes Bottleneck Detection Yes Yes Lossless DLS No No * indicates the feature is available but not officially tested or supported 1. Requires M-EOS 9.7 or later for redirection between devices attached to FOS switches, M-EOS 9.8 for redirection between devices attached to M-EOS switches, M-EOS 9.9 for use in McDATA Open Fabric Mode. Supported M-EOS platforms include M4400, M4700, M6140, and Mi10k. 2. Only allowed between FOS-based switches. 3. DPS is supported outbound from FOS-based switches. (M-EOS can provide reciprocal load balancing using OpenTrunking). 4. SCC policies only supported in conjunction with L2 Fabric Binding support. 5. Not supported in FOS 6.0 or later. 6. Mode 3 only qualified with M-EOS switches. 7. Not on FCR. 8. Only supported locally within the FOS switch. 9. All routers (EX_Ports) must reside in a backbone fabric running in interopmode 0 only. Only edge fabrics with devices imported to the backbone fabric or other edge fabrics may be operating in IM2 or IM3. Fabric OS v6.4.1 Release Notes v1.0 Page 20 of 62
![](/manual_guide/products/dell-8-fabric-os-release-notes-03d68cc/20.png)