Dell OptiPlex 5080 Micro Service Manual - Page 36
Installing the heat sink
![]() |
View all Dell OptiPlex 5080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2. Remove the side cover. 3. Remove the front bezel. 4. Remove the fan assembly. About this task The following images indicate the location of the heat sink and provide a visual representation of the removal procedure. Steps 1. Loosen the three captive screws that secure the heat sink to the system. NOTE: Loosen the screw in the sequential order (1,2,3) as printed on the heat sink. 2. Lift the heat-sink from the system board. Installing the heat sink Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. 36 Disassembly and reassembly
![](/manual_guide/products/dell-optiplex-5080-micro-service-manual-eb5f301/36.png)
2.
Remove the
side cover
.
3.
Remove the
front bezel
.
4.
Remove the
fan assembly
.
About this task
The following images indicate the location of the heat sink and provide a visual representation of the removal procedure.
Steps
1.
Loosen the three captive screws that secure the heat sink to the system.
NOTE:
Loosen the screw in the sequential order (1,2,3) as printed on the heat sink.
2.
Lift the heat-sink from the system board.
Installing the heat sink
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
36
Disassembly and reassembly