Dell OptiPlex 5080 Micro Service Manual - Page 29
WLAN card, Removing the WLAN card
![]() |
View all Dell OptiPlex 5080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board. 2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector. 3. Replace the screw (M2x3.5) that secures the M.2 2280 PCIe solid-state drive to the system board. Next steps 1. Install the hard-drive assembly. 2. Install the front bezel. 3. Install the side cover. 4. Follow the procedure in after working inside your computer. WLAN card Removing the WLAN card Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the front bezel. 4. Remove the hard-drive assembly. About this task The following images indicate the location of the wireless card and provide a visual representation of the removal procedure. Disassembly and reassembly 29
![](/manual_guide/products/dell-optiplex-5080-micro-service-manual-eb5f301/29.png)