Dell Latitude 3300 Service Manual - Page 71
Connect the EDP cable [3], place the EDP bracket on the connector [4]
![]() |
View all Dell Latitude 3300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
3. Route the antennae cable along the edges of the fan case [1] and stick a piece of tape [2] to secure it to the system board. 4. Connect the EDP cable [3], place the EDP bracket on the connector [4] , and secure it to system board using the single screw [5]. 5. Install the: a) DC-in cable b) WLAN card c) battery d) base cover Disassembly and reassembly 71
![](/manual_guide/products/dell-latitude-3300-service-manual-f397663/71.png)
3.
Route the antennae cable along the edges of the fan case [1] and stick a piece of tape [2] to secure it to the system board.
4.
Connect the EDP cable [3], place the EDP bracket on the connector [4] , and secure it to system board using the single screw [5].
5.
Install the:
a)
DC-in cable
b)
WLAN card
c)
battery
d)
base cover
Disassembly and reassembly
71