D-Link DIR-885L/R User Manual - Page 48
PPPoE Session, Username, Password, Address Mode, IP Address, DNS Type, Primary DNS, Server
View all D-Link DIR-885L/R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Section 4 - Configuration PPPoE Select PPPoE if your Internet connection requires you to enter a username and password. This information is provided by your Internet service provider (ISP). PPPoE Session: Choose Share with IPv4 to re-use your IPv4 PPPoE username and password, or Create a new session. Username: If you selected Create a new session above, enter the PPPoE username provided by your ISP here. Password: If you selected Create a new session above, enter the PPPoE password provided by your ISP here. Address Mode: Select Static IP if your ISP assigned you the IP address, subnet mask, gateway, and DNS server addresses. In most cases, select Dynamic IP. IP Address: Enter the IP address provided by your ISP (Static IP only). MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. DNS Type: Select either Obtain DNS server address automatically or Use the following DNS address. Primary DNS If you selected Use the following DNS address above, enter the Server: primary DNS server address. Secondary DNS If you selected Use the following DNS address above, enter the Server: secondary DNS server address. D-Link DIR-885L User Manual 44