D-Link DIR-885L/R User Manual

D-Link DIR-885L/R Manual

D-Link DIR-885L/R manual content summary:

  • D-Link DIR-885L/R | User Manual - Page 1
    Version 1.00 | December 15, 2015 User Manual AC3150 Ultra Wi-Fi Router DIR-885L
  • D-Link DIR-885L/R | User Manual - Page 2
    (HiNA), and automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 8.73 watts Switched Off: 0.05 watts D-Link DIR-885L User Manual i
  • D-Link DIR-885L/R | User Manual - Page 3
    Before you Begin 8 Wireless Installation Considerations 9 Manual Setup 10 Getting Started 13 Setup Wizard 14 QRS Mobile App 18 Configuration 23 Home 24 Internet 24 DIR-885L 25 Connected Clients 26 70 Management 71 Time & Schedule 71 Time 71 Schedule 72 D-Link DIR-885L User Manual ii
  • D-Link DIR-885L/R | User Manual - Page 4
    Setup 110 Main Menu 115 Documents 116 Pictures 118 Videos 120 Music 122 Folders 125 Favorites 129 Troubleshooting 130 Wireless Basics 134 What is Wireless 135 Tips 137 Wireless Modes 142 Contacting Technical Support 143 Warranty 144 Registration 151 D-Link DIR-885L User Manual iii
  • D-Link DIR-885L/R | User Manual - Page 5
    Section 1 - Product Overview PProacdkuacgteOCvoentrevnietsw DIR-885L AC3150 Ultra Wi-Fi Router Ethernet Cable Power Adapter Wi-Fi Configuration Note Wi-Fi Configuration Card Quick Installation Guide If any of the above items are missing, please contact your reseller. Note: Using a power
  • D-Link DIR-885L/R | User Manual - Page 6
    Web-based Configuration Utility Requirements Computer with the following: • An installed Ethernet adapter or wireless adapter Browser Requirements: • Internet Explorer® 8 • Mozilla® Firefox® 28 or higher • and mydlink app requirements refer to http://www.mydlink.com D-Link DIR-885L User Manual 2
  • D-Link DIR-885L/R | User Manual - Page 7
    Section 1 - Product Overview Introduction The D-Link DIR-885L AC3150 Ultra Wi-Fi Router uses advanced AC beamforming technology to maximize the speed and range of your wireless signal to significantly outperform 802.11n and other 802.11ac devices. It also comes equipped with four Gigabit Ethernet
  • D-Link DIR-885L/R | User Manual - Page 8
    - The DIR-885L support the QRS Mobile app to setup the router using a mobile device. It is also mydlink-enabled so you can remotely access and mange your DIR-885L from a mobile throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DIR-885L User Manual 4
  • D-Link DIR-885L/R | User Manual - Page 9
    The DIR-885L is designed to give you the fastest, most stable network connection possible. In order to maximize performance, orient the antennas at an angle, pointing outward and away from the base unit. Note: Attach the antennas to the router before powering it on. D-Link DIR-885L User Manual 45
  • D-Link DIR-885L/R | User Manual - Page 10
    your broadband modem to this port. 7 Power Button Press the power button to power on and off. 8 Power Connector Connector for the supplied power adapter. * Extender mode will be supported in early 2016 with a firmware upgrade. D-Link DIR-885L User Manual 6
  • D-Link DIR-885L/R | User Manual - Page 11
    A solid white light indicates that the 2.4 GHz wireless band is enabled. 4 Wireless (5 GHz) LED A solid white light indicates that the 5 GHz wireless band is enabled. 5 USB 3.0 LED A solid white light indicates that a USB device detected in the USB 3.0 port. D-Link DIR-885L User Manual 7
  • D-Link DIR-885L/R | User Manual - Page 12
    modem. • This router only supports Internet connectivity though the wired Internet Ethernet port. If you were using a USB connection on your computer to access the Internet before using the router, then you must or you will not be able to connect to the Internet. D-Link DIR-885L User Manual 8
  • D-Link DIR-885L/R | User Manual - Page 13
    range. Try to position access points, wireless routers, wireless connection may degrade dramatically or drop completely. Make sure your 2.4 GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the phone is not in use. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 14
    Section 2 - Installation Manual Setup 1. Attach the four antennas to the router by twisting them on clockwise. 2. Unplug the power to your DSL or Cable modem. Modem D-Link DIR-885L User Manual 10
  • D-Link DIR-885L/R | User Manual - Page 15
    Wi-Fi Configuration Card for the Wi-Fi network name (SSID) and Wi-Fi password of the router. Complete steps 5 and 6 before attempting to connect. 2A TT ROUTER EXTENDER RESET WPS USB 3.0 1 2 3 4 Ethernet POWER DC IN T DIR-885L Ethernet Cable Computer D-Link DIR-885L User Manual 11
  • D-Link DIR-885L/R | User Manual - Page 16
    the Power button on the back of the router. Modem 2A DIR-885L TT ROUTER EXTENDER RESET WPS USB 3.0 1 2 3 4 Ethernet POWER DC IN USB T POWER 12V 2A 1 2 3 4 INTERNET 12V --1.5A POWER WPS Computer Wireless Computer* * If you are connecting wirelessly, you may now connect to the
  • D-Link DIR-885L/R | User Manual - Page 17
    launch when you log into the router for the first time. Refer to page 14. • QRS Mobile App - Use your iPhone, iPad, or iPod touch to configure your router. Refer to page 18. • Manual Setup - Log into the router and manually configure your router. Refer to page 23 D-Link DIR-885L User Manual 13
  • D-Link DIR-885L/R | User Manual - Page 18
    the router (default: http://192.168.0.1). The wizard is designed to guide you through a step-by-step process to configure your new D-Link router and connect to the Internet. Click Next to continue. Please wait while your router detects your Internet connection type. D-Link DIR-885L User Manual 14
  • D-Link DIR-885L/R | User Manual - Page 19
    service provider) and click Next to continue. If the router detected or you selected PPPoE, enter your PPPoE username and password router. If the router detected or you selected Static, enter the IP and DNS settings supplied by your ISP. Click Next to continue. D-Link DIR-885L User Manual DIR-885L
  • D-Link DIR-885L/R | User Manual - Page 20
    a new password. You will be prompted for this password every time you want to use the router's web configuration utility. Click Next to continue. The Summary window will display your settings. Click Next if you are satisfied, or click Back to make changes to them. D-Link DIR-885L User Manual 16
  • D-Link DIR-885L/R | User Manual - Page 21
    your mydlink account with the router. If you clicked No, fill out the requested information and click Next to create your mydlink account. At the end of the wizard, you will be presented with a final summary of your settings. Click Finish to close the wizard. D-Link DIR-885L User Manual 17
  • D-Link DIR-885L/R | User Manual - Page 22
    SSID) as listed on the supplied info card. Select and then enter your Wi-Fi password. Step 3 Once wirelessly connected to the router, launch the QRS Mobile app from the Home screen of your device. Note: The that of the screenshots, but the process is the same. D-Link DIR-885L User Manual 18
  • D-Link DIR-885L/R | User Manual - Page 23
    password and tap Log In. Tap Next once the Operation Mode screen appears. Step 5 At this point, please ensure that you the router is connected to a modem. Plug one end of the provided Ethernet cable into your DSL or cable modem, and plug the other end into the port marked INTERNET on the DIR-885L
  • D-Link DIR-885L/R | User Manual - Page 24
    Next to proceed. Step 7 Enter the administrator password of your choice. Unlike the Wi-Fi password, this password is only required when you need to configure the router. See "Configuration" on page 23 for details of when this password is used. Tap Next to proceed. D-Link DIR-885L User Manual 20
  • D-Link DIR-885L/R | User Manual - Page 25
    your router with mydlink at this stage, tap Skip to proceed. Step 9 If you wish to receive push notifications whenever a new firmware update is available, check the Notify me when new firmware is available box and tap Next. Otherwise, just tap Next to proceed. D-Link DIR-885L User Manual 21
  • D-Link DIR-885L/R | User Manual - Page 26
    will be presented with a summary of your chosen settings. Tap Save to complete the setup. Your device has now been successfully configured. You can share this information by tapping message appears. Note: NFC is not supported by iPhone, iPad, and iPod touch devices. D-Link DIR-885L User Manual 22
  • D-Link DIR-885L/R | User Manual - Page 27
    The router's home page will open displaying its current connection status. The bar at the top of the page has quick access to Settings and Management functions. You may quickly jump back Home at any time. Note: The system will automatically log out after a period of inactivity. D-Link DIR-885L User
  • D-Link DIR-885L/R | User Manual - Page 28
    icon. Click IPv4 or IPv6 to see details of the IPv4 connection and IPv6 connection respectively. Click Release to disconnect from the Internet. If you do this and wish to reconnect, click Renew. DIR-885L To reconfigure the Internet settings, refer to page 28. D-Link DIR-885L User Manual 24
  • D-Link DIR-885L/R | User Manual - Page 29
    ) and then Network on the menu that appears. Refer to page 55. To reconfigure the wireless settings, either click Go to settings, on the lower right, or click Settings (at the top of the page) and then Wireless on the menu that appears. Refer to page 52. DIR-885L D-Link DIR-885L User Manual 25
  • D-Link DIR-885L/R | User Manual - Page 30
    device. IP Address: Enter a specific IP address for this client. Reserve IP: Enable to reserve this IP address for this client. Parental Allow or Block access to the router. Control: Click Save when you are done. D-Link DIR-885L User Manual 26
  • D-Link DIR-885L/R | User Manual - Page 31
    media server, SharePort, and Windows File Sharing. If you have a USB device connected, you can see its name and how much free space it has. DIR-885L To configure your SharePort settings, click Go to settings and refer to page 57. D-Link DIR-885L User Manual 27
  • D-Link DIR-885L/R | User Manual - Page 32
    on the top of the page, click Wizard to open the setup wizard. This is the same wizard that appears when you start the router for the first time. Refer to page 14 for details. Internet page 36. To configure an IPv6 connection, click the IPv6 link. Refer to page 37. D-Link DIR-885L User Manual 28
  • D-Link DIR-885L/R | User Manual - Page 33
    Internet Service default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use the drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 34
    ISP. MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-885L User Manual 30
  • D-Link DIR-885L/R | User Manual - Page 35
    . MAC Address The default MAC address is set to the Internet port's physical interface Clone: MAC address on the router. You can use drop-down menu to replace the Internet port's MAC address with the MAC address of a connected client. Click Save when you are done. D-Link DIR-885L User Manual 31
  • D-Link DIR-885L/R | User Manual - Page 36
    Point-to-Point-Tunneling Protocol ) if your Internet Service Provider (ISP) uses a PPTP connection. Your ISP will provide you with a username and password . Password: Enter the password provided by your ISP. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Link DIR-885L User Manual 32
  • D-Link DIR-885L/R | User Manual - Page 37
    Section 4 - Configuration Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 33
  • D-Link DIR-885L/R | User Manual - Page 38
    ) if your Internet Service Provider (ISP) uses a L2TP connection. Your ISP will provide you with a username and password. L2TP Server IP your ISP. Password: Enter the password provided by your ISP. Reconnect Select either Always-on, On-Demand, or Manual. Mode: Maximum D-Link DIR-885L User Manual 34
  • D-Link DIR-885L/R | User Manual - Page 39
    Section 4 - Configuration Secondary DNS Enter the secondary DNS server IP address assigned by your ISP. Server: MTU: Maximum Transmission Unit - you may need to change the MTU for optimal performance with your ISP. Click Save when you are done. D-Link DIR-885L User Manual 35
  • D-Link DIR-885L/R | User Manual - Page 40
    router allocate the AFTR IPv6 Configuration: address automatically. Select Manual Configuration to enter the AFTR IPv6 address manually. AFTR IPv6 If you selected Manual WAN default gateway address will be Default displayed here. Gateway: Click Save when you are done. D-Link DIR-885L User Manual 36
  • D-Link DIR-885L/R | User Manual - Page 41
    Section 4 - Configuration IPv6 To configure an IPv6 connection, click the IPv6 link. To return to the IPv4 settings, click IPv4. My Internet Choose your IPv6 connection type from refer to page 48. For 6rd refer to page 49. For Local Connectivity Only refer to page 51. D-Link DIR-885L User Manual 37
  • D-Link DIR-885L/R | User Manual - Page 42
    or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-885L User Manual 38
  • D-Link DIR-885L/R | User Manual - Page 43
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 39
  • D-Link DIR-885L/R | User Manual - Page 44
    address. Server: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: Enable Check to enable the Automatic IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: D-Link DIR-885L User Manual 40
  • D-Link DIR-885L/R | User Manual - Page 45
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6. Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 41
  • D-Link DIR-885L/R | User Manual - Page 46
    or disable DHCP-PD for other IPv6 routers connected to the Automatic LAN interface. DHCP-PD in LAN: Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-885L User Manual 42
  • D-Link DIR-885L/R | User Manual - Page 47
    Section 4 - Configuration Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 43
  • D-Link DIR-885L/R | User Manual - Page 48
    the PPPoE username provided by your ISP here. Password: If you selected Create a new session above, enter the PPPoE password provided by your ISP here. Address Mode: Select Static IP if your ISP assigned you above, enter the Server: secondary DNS server address. D-Link DIR-885L User Manual 44
  • D-Link DIR-885L/R | User Manual - Page 49
    allocation), such as /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 45
  • D-Link DIR-885L/R | User Manual - Page 50
    to run in IPv4 Tunnel mode. IPv6 over IPv4 tunneling encapsulates routers connected to the PD: LAN interface. Note: This feature requires a smaller subnet prefix than /64 (i.e. allowing for a larger address allocation), such as /63. Contact your ISP for more information. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 51
    allocation), such as /63. Contact your ISP for more information. Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 47
  • D-Link DIR-885L/R | User Manual - Page 52
    IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 48
  • D-Link DIR-885L/R | User Manual - Page 53
    minimize the number of routes to the Spoke Mode: destination by using a hub and spoke manual configuration only). Address: LAN IPv6 Enter the LAN (local) IPv6 address for the router. Address: LAN IPv6 Link- Displays the router's LAN link-local address. Local Address: D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 54
    IPv6 Address Assignment feature. Automatic IPv6 Address Assignment: Auto Select Stateful (DHCPv6), SLAAC + RDNSS or SLAAC + Stateless Configuration DHCPv6 Type: Router Enter the IPv6 address lifetime (in minutes). Advertisement Lifetime: Click Save when you are done. D-Link DIR-885L User Manual 50
  • D-Link DIR-885L/R | User Manual - Page 55
    configure the ULA prefix for ULA Prefix: the default setting. ULA Prefix: If you wish to choose your own ULA prefix, enter it here. Current IPv6 This section will display the current settings for your IPv6 ULA. ULA Settings: Click Save when you are done. D-Link DIR-885L User Manual 51
  • D-Link DIR-885L/R | User Manual - Page 56
    The default is Auto (recommended). Transmission Select the desired wireless transmission power. Power: Channel Width: Select Auto 20/40 if you are using both 802.11n and non-802.11n wireless devices, or select 20 MHz if you are not using any 802.11n wireless clients. D-Link DIR-885L User Manual 52
  • D-Link DIR-885L/R | User Manual - Page 57
    your wireless network. Schedule: Use the drop-down menu to select the time schedule that the rule will be enabled on. The schedule may be set to Always Enable, or you can create your own schedules in the Schedules section (refer to page 72). Click Save when you are done. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 58
    Wireless clients will need to enter this password to successfully connect to the guest zone. Internet Access Enabling this option will confine connectivity to the Internet, Only: disallowing guests from accessing other local network devices. Click Save when you are done. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 59
    IP Enter the starting and ending IP addresses for the DHCP server's IP Address Range: assignment. Note: If you statically (manually) assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. D-Link DIR-885L User Manual 55
  • D-Link DIR-885L/R | User Manual - Page 60
    Auto (recommended). IPv4 Multicast Enable to allow IPv4 multicast traffic to pass through the router from Stream: the Internet. IPv6 Multicast Enable to allow IPv6 multicast traffic to pass through the router from Stream: the Internet. Click Save when you are done. D-Link DIR-885L User Manual 56
  • D-Link DIR-885L/R | User Manual - Page 61
    to your SharePort drive through a web browser from a device on your network. Note: You may only use these link in local network. Click Save when you are done. To manage user accounts for SharePort access, click Create User and refer to the next page for details. D-Link DIR-885L User Manual 57
  • D-Link DIR-885L/R | User Manual - Page 62
    users will be restricted to guest access; only having access to the "Guest" folder on the media server. The router can store a maximum of ten : Enter the desired user name for the new account. Password: Enter the password which the user will need to enter when logging in. Link DIR-885L User Manual 58
  • D-Link DIR-885L/R | User Manual - Page 63
    - Configuration mydlink Enabling mydlink will allow you to access and manage the mydlink-compatible devices on your network email address (which is also your username) and your password. Then, click Sign In to register your existing mydlink account with your router. D-Link DIR-885L User Manual 59
  • D-Link DIR-885L/R | User Manual - Page 64
    empty slot and release the mouse button. The card will remain in the slot. If you want to remove a priority assignment from a device and return it to the All Devices list, click the cross icon in the top right of the device card. Click Save when you are done. D-Link DIR-885L User Manual 60
  • D-Link DIR-885L/R | User Manual - Page 65
    Section 4 - Configuration Firewall Settings The router's firewall protects your network from malicious attacks over the Internet. In the Features menu on the bar : PPTP: Allows multiple machines on the LAN to connect to their corporate network using the PPTP protocol. D-Link DIR-885L User Manual 61
  • D-Link DIR-885L/R | User Manual - Page 66
    support traversal of IPSec through NAT. This Application Level Gateway (ALG) may interfere with the operation of such VPN clients. If you are having trouble If you are having trouble making VoIP calls, try turning this ALG off. Click Save when you are done. D-Link DIR-885L User Manual 62
  • D-Link DIR-885L/R | User Manual - Page 67
    : Name: Enter a name for the rule. Source IP Enter the source IP address range that the rule will apply to, and using Address Range: the drop-down menu, specify whether it is a WAN or LAN IP address. Destination section (refer to page 72). Click OK when you are done. D-Link DIR-885L User Manual 63
  • D-Link DIR-885L/R | User Manual - Page 68
    range of ports to open for specific devices on the network. This might be necessary for certain applications to connect through the router on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Link DIR-885L User Manual 64
  • D-Link DIR-885L/R | User Manual - Page 69
    you to specify a single public port on your router for redirection to an internal LAN IP Address and of the computer on your local network that you want to allow the incoming service to. Alternatively, select the device from the drop-down menu. Protocol: Select the D-Link DIR-885L User Manual 65
  • D-Link DIR-885L/R | User Manual - Page 70
    block, select DENY computers access to ONLY these sites from the drop-down menu. All other sites will be accessible. If you want to specify a list of sites to allow, select ALLOW computers access to ONLY these sites the URL or domain. Click Save when you are done. D-Link DIR-885L User Manual 66
  • D-Link DIR-885L/R | User Manual - Page 71
    - Configuration Static Routes The Static Routes section allows you to define custom routes to control how data traffic is moved around your network. In that the IP packet must use to transit out of the router when this route is used. Click OK when you are done. D-Link DIR-885L User Manual 67
  • D-Link DIR-885L/R | User Manual - Page 72
    Name: Enter a name for the rule. DestNetwork: This is the IP address of the router used to reach the specified destination. PrefixLen: Enter the IPv6 address prefix length of the to transit out of the router when this route is used. Click OK when you are done. D-Link DIR-885L User Manual 68
  • D-Link DIR-885L/R | User Manual - Page 73
    Name: Enter your dynamic DNS username. Password: Enter your dynamic DNS password. Time Out: Enter a timeout time (in hours). Click Save when you are done. At the bottom of the page are the IPv6 host settings. To configure an IPv6 dynamic DNS host, refer to page 70. D-Link DIR-885L User Manual 69
  • D-Link DIR-885L/R | User Manual - Page 74
    options will appear: Host Name: Enter the host name that you registered with your dynamic DNS service provider. IPv6 Address: Enter the IPv6 address of the dynamic DNS server. Alternatively, select the server device in the drop-down menu. Click OK when you are done. D-Link DIR-885L User Manual 70
  • D-Link DIR-885L/R | User Manual - Page 75
    the drop-down menu. To configure the router's time and date manually, disable this option and use the drop-down menus that appear to input the time and date. Click Save when you are done. To configure and manage your schedules, click Schedule and refer to page 72. D-Link DIR-885L User Manual 71
  • D-Link DIR-885L/R | User Manual - Page 76
    schedule, but only one period per day. To remove a time period from the schedule, click on the cross icon. Click OK when you are done. D-Link DIR-885L User Manual 72
  • D-Link DIR-885L/R | User Manual - Page 77
    settings for your email account. These are obtained from your email service provider. On Log Full: If email notification is enabled, this option will set the router to send the log by email when the log is fully. (refer to page 72). Click Save when you are done. D-Link DIR-885L User Manual 73
  • D-Link DIR-885L/R | User Manual - Page 78
    . Note: If you enabled HTTPS Server and wish to access the router remotely and securely, you must enter https:// at the beginning of the address. Click Save when you are done. To load, save, or reset settings, or reboot the router, click System and refer to page 75. D-Link DIR-885L User Manual 74
  • D-Link DIR-885L/R | User Manual - Page 79
    Section 4 - Configuration System This page allows you to save the router's current configuration, load a previously saved configuration, reset the router to its factory default settings, or reboot the router. DIR-885L From the Admin page, click System. To return to the Admin page, click Admin.
  • D-Link DIR-885L/R | User Manual - Page 80
    If you wish to upgrade manually, first download the firmware file you wish Firmware: to upgrade to. Next, click the Upgrade Firmware button and browse to the file to install the new firmware. You can also browse to a language pack file to install a new language pack. D-Link DIR-885L User Manual 76
  • D-Link DIR-885L/R | User Manual - Page 81
    On the Statistics page you can view the amount of packets that pass through the router on the WAN, LAN, and wireless segments. In the Management menu on the bar on the top of the page, the graph, click Clear. The traffic counter will reset if the device is rebooted. D-Link DIR-885L User Manual 77
  • D-Link DIR-885L/R | User Manual - Page 82
    Protected Setup). Most wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a software utility with WPS) that you can press to connect to the DIR-885L router. Please refer to your user manual for the wireless device
  • D-Link DIR-885L/R | User Manual - Page 83
    your computer. Select the desired network by clicking on the network name.You will then be prompted to enter the network security key (Wi-Fi password) for the wireless network. Enter the password into the box and click Next. Wireless Icon D-Link DIR-885L User Manual 79
  • D-Link DIR-885L/R | User Manual - Page 84
    router, you can also press the WPS button on your router during this step to enable the WPS function. 4. When you have established a successful connection to a wireless network, the word Connected will appear next to the name of the network to which you are connected to. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 85
    you enable wireless security (WPA/WPA2) on your wireless router or access point before configuring your wireless adapter. If wireless icon in your system tray (lower-right corner). 2. The utility will display any available wireless networks in your area. Wireless Icon D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 86
    get a good signal but cannot access the Internet, check your TCP/ IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. 4. The following window appears while your computer tries to connect to the router. D-Link DIR-885L User Manual 82
  • D-Link DIR-885L/R | User Manual - Page 87
    by pushing the WPS button on the router. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-885L User Manual 83
  • D-Link DIR-885L/R | User Manual - Page 88
    a Wireless Network WPS The WPS feature of the DIR-885L can be configured using Windows® 7. Carry out the following steps to use Windows® 7 to configure the WPS feature: 1. Click the Start button and select Computer from the Start menu. 2. Click Network on the left side. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 89
    Section 5 - Connecting to a Wireless Network 3. Double-click the DIR-885L. DIR-885L 4. Input the WPS PIN number (on the router label) in the Setup > Wireless Setup menu in the Router's Web UI) and click Next. D-Link DIR-885L User Manual 85
  • D-Link DIR-885L/R | User Manual - Page 90
    Section 5 - Connecting to a Wireless Network 5. Type a name to identify the network. 6. To configure advanced settings, click the icon. Click Next to continue. D-Link DIR-885L User Manual 86
  • D-Link DIR-885L/R | User Manual - Page 91
    The following window informs you that WPS on the router has been set up successfully. Make a note of the security key as you may need to provide this security key if adding an older wireless device to the network in the future. 9. Click Close to complete WPS setup. D-Link DIR-885L User Manual 87
  • D-Link DIR-885L/R | User Manual - Page 92
    area. Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DIR-885L User Manual 88
  • D-Link DIR-885L/R | User Manual - Page 93
    used. 1. Open the Windows Vista® Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the Wi-Fi name (SSID) you would like to connect to and click Connect. D-Link DIR-885L User Manual 89
  • D-Link DIR-885L/R | User Manual - Page 94
    -Fi password) that is on your router and click Connect. It may take 20-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as the one on the wireless router. D-Link DIR-885L User
  • D-Link DIR-885L/R | User Manual - Page 95
    during the initial setup of your DIR-885L, you may begin the registration process any time by accessing the mydlink SharePort feature from within the router configuration. Please see , it may take a while for the router to scan and catalog your files. D-Link DIR-885L User Manual USB device 91
  • D-Link DIR-885L/R | User Manual - Page 96
    the Admin password and your mydlink Account Login information when the pop-up displays. Tap Done when your information is entered. (The Admin password is only for local access, if you can connect through the Internet, then you can leave the Admin password blank). D-Link DIR-885L User Manual 92
  • D-Link DIR-885L/R | User Manual - Page 97
    the top-left corner) and you will be prompted to select the device you wish to use. Note: A red wireless icon indicates that your router's network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DIR-885L User Manual 93
  • D-Link DIR-885L/R | User Manual - Page 98
    Wi-Fi settings and connect to your router's wireless network using the default Wi-Fi settings. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card. 4. Tap the mydlink SharePort icon, and the app will load. D-Link DIR-885L User Manual 94
  • D-Link DIR-885L/R | User Manual - Page 99
    your settings, tap the gear icon at the top right corner to enter the settings page. Note: A red wireless icon indicates that your router's network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DIR-885L User Manual 95
  • D-Link DIR-885L/R | User Manual - Page 100
    the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. D-Link DIR-885L User Manual 96
  • D-Link DIR-885L/R | User Manual - Page 101
    Documents The Documents section allows you to share, print, and view documents streamed from your DIR-885L to your mobile device. Tap the document icon on the main menu to browse the documents update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 97
  • D-Link DIR-885L/R | User Manual - Page 102
    Section 6 - mydlink Shareport Tap on a file to start the document viewer. In the viewer: Tap to add/remove the file from your Favorites. Tap to bring up the same options as >. Note: Some files may require a third-party app to view them. D-Link DIR-885L User Manual 98
  • D-Link DIR-885L/R | User Manual - Page 103
    Section 6 - mydlink Shareport Pictures The Pictures section allows you to stream images from your DIR-885L to your mobile device. Tap the camera icon on the main menu to browse your photo menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 99
  • D-Link DIR-885L/R | User Manual - Page 104
    Section 6 - mydlink Shareport Tap on a file to start the photo viewer. In the viewer: Tap to add/remove the current image from your Favorites. Tap to start the slideshow. Tap to bring up the same options as >. D-Link DIR-885L User Manual 100
  • D-Link DIR-885L/R | User Manual - Page 105
    - mydlink Shareport Videos The Videos section allows you to stream video clips and movies from your DIR-885L to your mobile device. Tap the movie icon on the main menu to browse your videos . Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 101
  • D-Link DIR-885L/R | User Manual - Page 106
    /exit fullscreen mode. Tap to add/remove the file from your Favorites. Tapping this icon gives you additional options: • Mail: Lets you e-mail the video. • iCloud: Lets you store the video on iCloud. • Open In...: Lets you use a third-party app to open the file. D-Link DIR-885L User Manual 102
  • D-Link DIR-885L/R | User Manual - Page 107
    Section 6 - mydlink Shareport Music The Music section allows you to stream songs from your DIR-885L to your mobile device. Tap the music icon on the main menu to browse your music main menu. Tap to update the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 103
  • D-Link DIR-885L/R | User Manual - Page 108
    to repeat a single song. Tap to skip to the previous/next song. Tap to enable/disable shuffle mode. To create a playlist: Tap Edit > Add Playlist. Enter a name for the playlist, then tap Save. The name of the playlist will appear in the browser next to the icon. D-Link DIR-885L User Manual 104
  • D-Link DIR-885L/R | User Manual - Page 109
    add and tap Done. To delete songs from the playlist: Tap Edit in the playlist browser and mark the files to be deleted. Tap Delete. D-Link DIR-885L User Manual 105
  • D-Link DIR-885L/R | User Manual - Page 110
    previous pages. You can also upload files from your mobile device to the removable storage attached to your router. Search Bar: Enter a filename here to search your storage. Tap to take you to the editing the list of files. Tap to reorder the files alphabetically. D-Link DIR-885L User Manual 106
  • D-Link DIR-885L/R | User Manual - Page 111
    top right. Tap Add Folder to add a new folder. Enter the name of the new folder, then tap Save. Tap OK to confirm folder creation. D-Link DIR-885L User Manual 107
  • D-Link DIR-885L/R | User Manual - Page 112
    file and the upload progress will be displayed. To upload more files, tap the + icon at the top right and repeat the steps listed above. D-Link DIR-885L User Manual 108
  • D-Link DIR-885L/R | User Manual - Page 113
    to mark files for deletion from the local storage in Favorites. The file will still be accessible in other mydlink SharePort sections. Tapping this icon gives you additional options depending on the file file options available will vary depending on the file type. D-Link DIR-885L User Manual 109
  • D-Link DIR-885L/R | User Manual - Page 114
    during the initial setup of your DIR-885L, you may begin the registration process any time by accessing the mydlink SharePort feature from within the router configuration. Please see capacity, it may take a while for the router to scan and catalog your files. D-Link DIR-885L User Manual 110
  • D-Link DIR-885L/R | User Manual - Page 115
    the Admin password and your mydlink Account Login information when the pop-up displays. Tap Apply when your information is entered. (The Admin password is only for local access, if you can connect through the Internet, then you can leave the Admin password blank) D-Link DIR-885L User Manual 111
  • D-Link DIR-885L/R | User Manual - Page 116
    for a direct network connection and you may experience slow network speeds. Note: A red wireless icon indicates that your router's network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DIR-885L User Manual 112
  • D-Link DIR-885L/R | User Manual - Page 117
    to the right. 3. On your mobile device, go to your Wi-Fi settings and connect to your router's wireless network using the default Wi-Fi settings. Locate the Wi-Fi name (SSID) and password for your device as printed on the included Wi-Fi Configuration Card. DIR-885L D-Link DIR-885L User Manual 113
  • D-Link DIR-885L/R | User Manual - Page 118
    The wireless icon at the bottom will be lit blue to indicate a Local Access connection. Note: A red wireless icon indicates that your router's network environment may not be optimal for streaming media and you may experience slow downs or otherwise degraded performance. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 119
    the music icon to play audio files. Tap on the folder icon to browse all files in a folder view. Tap on the star icon to access your favorite files. Note: Available features may differ depending on the Android OS version of your device. D-Link DIR-885L User Manual 115
  • D-Link DIR-885L/R | User Manual - Page 120
    The Documents section allows you to share, print, and view documents streamed from your DIR-885L to your mobile device. Tap the document icon on the main menu to browse the Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 116
  • D-Link DIR-885L/R | User Manual - Page 121
    pages. Tap to perform File, Find, Zoom, Reading View, Go To Page, and Bookmarks actions. Note: Available actions may differ depending on your Android OS. D-Link DIR-885L User Manual 117
  • D-Link DIR-885L/R | User Manual - Page 122
    mydlink Shareport Pictures The Pictures section allows you to view images streamed from your DIR-885L to your mobile device. Tap the camera icon on the main menu to browse files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 118
  • D-Link DIR-885L/R | User Manual - Page 123
    to stop the slideshow. Tap to delete the current image. Tap OK to confirm. Tap to bring up additional options using other applications. Tap to access the image editor. Note: This function may vary depending on the version of your Android OS. D-Link DIR-885L User Manual 119
  • D-Link DIR-885L/R | User Manual - Page 124
    Shareport Videos The Videos section allows you to stream video clips and movies from your DIR-885L to your mobile device. Tap the movie icon on the main menu to browse . Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-885L User Manual 120
  • D-Link DIR-885L/R | User Manual - Page 125
    button. Tap to resume playback. Tap to pause the video. Note: Available features may vary depending on the Android OS version installed on your device. D-Link DIR-885L User Manual 121
  • D-Link DIR-885L/R | User Manual - Page 126
    - mydlink Shareport Music The Music section allows you to stream songs from your DIR-885L to your mobile device. Tap the music icon on the main menu to browse of files. Tap to sort the files by name, size, type, or date. Check a file then tap this icon to delete it. D-Link DIR-885L User Manual 122
  • D-Link DIR-885L/R | User Manual - Page 127
    or pause the song. Tap to enable/disable shuffle mode. To create a playlist: Tap Tap Add new playlist... Enter a name for the playlist, then tap OK. The name of the playlist will appear in the browser next to the icon. You can tap then to refresh the playlist page. D-Link DIR-885L User Manual 123
  • D-Link DIR-885L/R | User Manual - Page 128
    . To delete songs from the playlist: Tap Edit in the playlist browser and mark the files to be deleted. Tap then tap OK to confirm. D-Link DIR-885L User Manual 124
  • D-Link DIR-885L/R | User Manual - Page 129
    the name of a file to search for it. Tap to return to the main menu. Tap to access file options. In the file browser: Tap to return to the main menu. Tap to upload files. Tap to refresh, sort, create a new folder, or mark files for deletion and copying. D-Link DIR-885L User Manual 125
  • D-Link DIR-885L/R | User Manual - Page 130
    following actions: Tap to update the list of files. Tap to sort the files by name, size, type, or date. Tap to create a new folder. Mark a file then tap this icon to delete it. Mark a file then tap next to each file for copying. Tap on to browse to the destination. D-Link DIR-885L User Manual 126
  • D-Link DIR-885L/R | User Manual - Page 131
    : Browse to the directory you wish to create a new folder in. Tap then . Enter the name of the folder in the box, then tap OK. D-Link DIR-885L User Manual 127
  • D-Link DIR-885L/R | User Manual - Page 132
    the file and the upload progress will be displayed under the file name. To remove a file from the upload queue, tap the X next to it. D-Link DIR-885L User Manual 128
  • D-Link DIR-885L/R | User Manual - Page 133
    Section 6 - mydlink Shareport Favorites The Favorites section allows you to quickly access your most often used files, no matter what file type, in a special list of files. Tap to sort the files by name, size, type, or date. Check a file then tap to delete it. D-Link DIR-885L User Manual 129
  • D-Link DIR-885L/R | User Manual - Page 134
    . Software firewalls such as ZoneAlarm, BLACKICE, Sygate, Norton Personal Firewall, and Windows® XP firewall may block access to the configuration pages. Check the help files included with your firewall software for more information on disabling or configuring it. D-Link DIR-885L User Manual 130
  • D-Link DIR-885L/R | User Manual - Page 135
    on, press and hold the button down for at least 10 seconds. Release the button and the router will go through its reboot process. Wait about 30 seconds to access the router. The default IP address is 192.168.0.1. When logging in, leave the password box empty. D-Link DIR-885L User Manual 131
  • D-Link DIR-885L/R | User Manual - Page 136
    Section 7 - Troubleshooting 3. Why can't I connect to certain sites or send and receive emails when connecting through my router? If you are having a problem sending or receiving email, or syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DIR-885L User Manual 132
  • D-Link DIR-885L/R | User Manual - Page 137
    Click on Setup and then click Manual Configure. • To change the MTU, enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DIR-885L User Manual 133
  • D-Link DIR-885L/R | User Manual - Page 138
    . Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide this link. D-Link DIR-885L User Manual 134
  • D-Link DIR-885L/R | User Manual - Page 139
    point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other outdoor venues. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 140
    and easy to use Small Office and Home Office Uses/Benefits • Stay on top of everything at home as you would at office • Remotely access your office network from home • Share Internet connection and printer with multiple computers • No need to dedicate office space D-Link DIR-885L User Manual 136
  • D-Link DIR-885L/R | User Manual - Page 141
    Interference Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access point. This would significantly reduce any interference that the appliances might cause since they operate on same frequency. D-Link DIR-885L User Manual 137
  • D-Link DIR-885L/R | User Manual - Page 142
    an access point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-hoc network contains only clients, such as laptops with wireless CardBus adapters. All the adapters must be in Ad-hoc mode to communicate. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 143
    the IP address, subnet mask, and default gateway of your adapter. If the address is 0.0.0.0, check your adapter installation, security settings, and the settings on your router. Some firewall software programs may block a DHCP request on newly installed adapters. D-Link DIR-885L User Manual 139
  • D-Link DIR-885L/R | User Manual - Page 144
    • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-885L User Manual 140
  • D-Link DIR-885L/R | User Manual - Page 145
    • Set Default Gateway the same as the LAN IP address of your router or gateway. • Set Primary DNS the same as the LAN IP address of your router or gateway. • The Secondary DNS is optional (you may enter a DNS server from your ISP). • Click OK to save your settings. D-Link DIR-885L User Manual 141
  • D-Link DIR-885L/R | User Manual - Page 146
    /Enterprise • WPA2™ - Personal/Enterprise • Wi-Fi Protected Setup (WPS) PIN/PBC Power • Input: 100 to 240 wireless signal range. 2 Frequency Range varies depending on country's regulation. 3 The DIR-885L does not include 5.25-5.35 GHz & 5.47-5.725 GHz in some regions. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 147
    asked questions and answers to technical issues. For customers within the United States: Phone Support: (877) 453-5465 Internet Support: http://support.dlink.com For customers within Canada: Phone Support: (800) 361-5265 Internet Support: http://support.dlink.ca D-Link DIR-885L User Manual 143
  • D-Link DIR-885L/R | User Manual - Page 148
    the defective Hardware will be refunded by D-Link upon return to D-Link of the defective Hardware. All Hardware or part thereof that is replaced by D-Link, or for which the purchase price is refunded, shall become the property of D-Link upon replacement or refund. D-Link DIR-885L User Manual 144
  • D-Link DIR-885L/R | User Manual - Page 149
    customer in resolving any suspected defects with the product. If the product is considered defective, the customer must obtain a Return Material Authorization ("RMA") number by completing the RMA form and entering the assigned Case ID Number at https:// rma.dlink.com/. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 150
    damaged in transit, and the RMA number must be prominently marked on the outside of the package. Do not include any manuals or accessories in the shipping package. D-Link will only replace the defective portion of the product and will not ship back any accessories. D-Link DIR-885L User Manual 146
  • D-Link DIR-885L/R | User Manual - Page 151
    will be rejected by D-Link. Products shall be fully insured by the customer and shipped to D-Link Networks, Inc., 2525 Meadowvale Boulevard Mississauga, Ontario, L5N 5S2 Canada. D-Link will not be held responsible OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT. D-Link DIR-885L User Manual 147
  • D-Link DIR-885L/R | User Manual - Page 152
    . Copyright ©2016 by D-Link Corporation/D-Link Systems, Inc. All rights reserved. CE Mark Warning: This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. D-Link DIR-885L User Manual 148
  • D-Link DIR-885L/R | User Manual - Page 153
    in accordance with the instructions, may cause harmful interference operated in 5.15 ~ 5.25GHz frequency range, then it is restricted in indoor firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user. D-Link DIR-885L User Manual
  • D-Link DIR-885L/R | User Manual - Page 154
    End users must follow the specific operating instructions for satisfying RF exposure compliance. This equipment MHz) to comply with the e.i.r.p. limits specified for point-to-point and non point-to-point operation as appropriate, as stated in section A9.2(3). érique. D-Link DIR-885L User Manual 150
  • D-Link DIR-885L/R | User Manual - Page 155
    Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.00 December 15, 2015 D-Link DIR-885L User Manual 151
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155

Version 1.00 | December 15, 2015
User Manual
DIR-885L
AC3150 Ultra Wi-Fi Router