D-Link DGS-3120-48TC Product Manual - Page 309
IPv4 Address / IPv6, Address, Timeout, Probe, Start, Resume
View all D-Link DGS-3120-48TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 309 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 11-27 Trace Route window (EI Mode Only) The fields that can be configured are described below: Parameter Description IPv4 Address / IPv6 Address IP address of the destination station. TTL The time to live value of the trace route request. This is the maximum number of routers that a trace route packet can pass. The trace route option will cross while seeking the network path between two devices. The range for the TTL is 1 to 60 hops. Port The port number. The value range is from 30000 to 64900. Timeout Defines the timeout period while waiting for a response from the remote device. A value of 1 to 65535 seconds can be specified. The default is 5 seconds. Probe The number of probing. The range is from 1 to 9. If unspecified, the default value is 1. Click the Start button to initiate the Trace Route. After clicking the Start button, the following page will appear: Figure 11-28 Trace Route Result window Click the Stop button to halt the Trace Route. Click the Resume button to resume the Trace Route. 301