D-Link DGS-3120-48TC Product Manual - Page 281
CFM Linktrace Settings, OAM > CFM > CFM Linktrace Settings
View all D-Link DGS-3120-48TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Figure 10-12 CFM Loopback Settings Window The fields that can be configured are described below: Parameter Description MEP Name Select and enter the Maintenance End Point name used. MEP ID Select and enter the Maintenance End Point ID used. MD Name Select and enter the Maintenance Domain name used. MD Index Select and enter the Maintenance Domain index used. MA Name Select and enter the Maintenance Association name used. MA Index Select and enter the Maintenance Association index used. MAC Address Enter the destination MAC address used here. LBMs Number Number of LBMs to be sent. The default value is 4. LBM Payload Length The payload length of LBM to be sent. The default is 0. LBM Payload Pattern An arbitrary amount of data to be included in a Data TLV, along with an indication whether the Data TLV is to be included. LBMs Priority The 802.1p priority to be set in the transmitted LBMs. If not specified, it uses the same priority as CCMs and LTMs sent by the MA. Click the Apply button to accept the changes made. CFM Linktrace Settings To view this window, click OAM > CFM > CFM Linktrace Settings, as shown below: 273