D-Link DGS-3120-48TC Product Manual - Page 308
Trace Route, Target IP Address, Repeat Pinging for, Size EI Mode Only, Timeout, Start, Resume
View all D-Link DGS-3120-48TC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
xStack® DGS-3120 Series Managed Switch Web UI Reference Guide Parameter Description Target IP Address Enter an IP address to be pinged. Repeat Pinging for Enter the number of times desired to attempt to Ping either the IPv4 address or the IPv6 address configured in this window. Users may enter a number of times between 1 and 255. Size (EI Mode Only) For IPv6 only, enter a value between 1 and 6000. The default is 100. Timeout Select a timeout period between 1 and 99 seconds for this Ping message to reach its destination. If the packet fails to find the IP address in this specified time, the Ping packet will be dropped. Click the Start button to initiate the Ping Test. After clicking the Start button, the following page will appear: Figure 11-25 Ping Test Result window Click the Stop button to halt the Ping Test. Click the Resume button to resume the Ping Test. Trace Route The trace route page allows the user to trace a route between the switch and a given host on the network. To view this window, click Monitoring > Trace Route as shown below: Figure 11-26 Trace Route window (SI Mode Only) 300