D-Link AC750 Quick Install Guide - Page 10

What if I forgot my Range Extender's Admin password or want to reset my Range Extender? 1. If you forgot your Admin password or want to reset your Range Extender back to the factory default settings, press and hold the reset button on the bottom of the extender using a paper clip and release after a minimum of 10 seconds. The Status light will turn red. Note: This process will erase all your settings. 2. Setup your Range Extender using your preferred method. Reset Button What if WPS setup is not working? WPS may be disabled on some Routers or Modems. If the WPS Status LED on your Router or Modem does not start blinking when you have pressed the WPS button, try again and hold it a little longer. If it still does not blink, STOP, and configure your Range Extender using Method Two: QRS Mobile Setup, on page 6. What is Mesh Smart Roaming? With Mesh Smart Roaming, your Wi-Fi device (e.g. SmartPhone, Tablet) will automatically roam to the strongest Wi-Fi signal, eliminating the need to switch between your Router's and Range Extender's Wi-Fi signal as you move around your home. Mesh Smart Roaming Requirements: 1. The Wi-Fi device (e.g. SmartPhone, Tablet) must support the 802.11k/v standard. 2. The Wireless Name (SSID) & Wireless Password must be the same on both the Mesh Wi-Fi Range Extender and your Wireless Router. Why don't I see a different network name (SSID) for each wireless band? By default, SmartConnect is enabled on this Range Extender. SmartConnect will automatically steer your device to the optimal wireless band (2.4GHz or 5GHz) according to current network traffic. When enabled, you will only see one wireless network name (SSID) from your Range Extender. 10 DAP-1530 Install Guide