D-Link AC3000 User Manual - Page 87
Static Route - IPv4
View all D-Link AC3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Section 3 - Configuration Static Route - IPv4 In the Features menu on the bar at the top of the page, click Static Route to define custom routes, controlling how data traffic is moved around your network. To configure the Static Route IPv6 settings, click the IPv6 link. Refer to Static Route - IPv6 on page 84 Click Save at any time to save the changes you have made on this page. If you wish to remove a route, click on the trash can icon in the Delete column. If you wish to edit a route, click on the pencil icon in the Edit column. If you wish to create a new route, click the Add Route button. If you clicked on Edit or Add Rule, the following options will appear: Name Enter a name for the rule. Destination Network Enter the IP address of packets that will take this route. Mask Enter the subnet mask of the route. Gateway Enter your next hop gateway to be taken when this route is used. Metric Enter a route metric value ranging from 0 to 15. This value indicates the cost of using this route. Interface Select the interface that the IP packet must use to transit out of the router when this route is used. D-Link DIR-3040 User Manual 83