D-Link AC3000 User Manual - Page 72
DHCP Server, Advanced Settings, Status, DHCP IP Address, Range, DHCP Lease Time, Always Broadcast
View all D-Link AC3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Section 3 - Configuration Status DHCP IP Address Range DHCP Lease Time Always Broadcast DHCP Server Enable or disable the DHCP server. Enter the starting and ending IP addresses for the DHCP server's IP assignment. Note: If you statically assign IP addresses to your computers or devices, make sure the IP addresses are outside of this range or you may have an IP conflict. Enter the length of time for the IP address lease in minutes. Enable this feature to broadcast your network's DHCP server to LAN/WLAN clients. WAN Port Speed UPnP IPv4 Multicast Streams IPv6 Multicast Streams Advanced Settings You may set the port speed of the Internet port to 10 Mbps, 100 Mbps, 1000 Mbps, or Auto (recommended). Enable or disable Universal Plug and Play (UPnP). UPnP provides compatibility with networking equipment, software, and peripherals. Enable to allow IPv4 multicast traffic to pass through the router from the Internet. This is enabled by default. Enable to allow IPv6 multicast traffic to pass through the router from the Internet. This is enabled by default. D-Link DIR-3040 User Manual 68