D-Link AC1200 User Manual - Page 41

Static IPv6, My IPv6, Connection is, IPv6 Address, Subnet Prefix, Length, Default Gateway

Page 41 highlights

Section 3 - Configuration Static IPv6 IPv6 Device Management Interface My IPv6 Select Static IPv6 to manually assign an IP address to the Connection is: DAP-1610. IPv6 Address: Enter the IPv6 address that you want to assign to the extended network AP. This address should be outside of the uplink router's DHCP address pool. Subnet Prefix Enter the length of the IPv6 subnet prefix. Length: Default Gateway: Enter the default gateway. Primary DNS Enter the primary IPv6 DNS server address. Server: Secondary DNS Enter the secondary IPv6 DNS server address. This is optional Server: but will provide backup if the primary server fails. D-Link DAP-1610 User Manual 37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64

37
D-Link DAP-1610 User Manual
Section 3 - Configuration
My IPv6
Connection is:
IPv6 Address:
Subnet Prefix
Length:
Default Gateway:
Primary DNS
Server:
Secondary DNS
Server:
Select
Static IPv6
to manually assign an IP address to the
DAP-1610.
Enter the IPv6 address that you want to assign to the
extended network AP. This address should be outside of the
uplink router’s DHCP address pool.
Enter the length of the IPv6 subnet prefix.
Enter the default gateway.
Enter the primary IPv6 DNS server address.
Enter the secondary IPv6 DNS server address. This is optional
but will provide backup if the primary server fails.
Static IPv6
IPv6 Device Management Interface