D-Link AC1200 User Manual - Page 37

Section 3 - Configuration Settings Extender Settings This page lets you configure the settings for the DAP-1610's extended wireless network. To access this page, click the Settings dropdown menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page. Existing Network Existing Select the type of existing network, either Ethernet or Wi-Fi Network: you want the DAP-1610 to connect to. 2.4 GHz Extended Wi-Fi Status: Enable or disable this network by toggling this slider. Wi-Fi Name This is the name of the DAP-1610's extended network. (SSID): If using Wi-Fi, the DAP-1610 will rebroadcast the uplink router's Internet connection under this SSID. You may also manually set the SSID of the extended network. Security: Select the type of wireless security you wish to use for the extended network. Choose None or WPA/WPA2 Personal. Password: Enter the password or network key that you wish to use for the extended network. Wi-Fi Select Auto or any channel from 1 to 11 for use with this Channel: network. Channel Select Auto 20/40 or 20 MHz for the bandwidth you wish Width: this network to use. HT20/40 Enable or disable HT20/40 coexistence by toggling the slider. Coexistence: D-Link DAP-1610 User Manual 33