Compaq 470007-798 Making Hardware Changes - Compaq Deskpro Family of Personal - Page 33
the drivelock automatically, secures the drive in the bay.
![]() |
UPC - 720591653163
View all Compaq 470007-798 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
2. Install two guide screws on each side of the drive 1. ✎ Some options use metric hardware. Extra guide screws are provided on the front of the chassis, under the front bezel. The Compaq-supplied metric screws are black. 3. Install the drive in the desired drive bay by sliding it into the front of the drive cage 2; the drivelock automatically secures the drive in the bay. ✎ Be sure the guide screws line up with the guide slots in the drive cage. Aligning the Guide Screws and Installing an Optional 5.25-Inch Drive Making Hardware Changes 2-23
![](/manual_guide/products/compaq-386182005-making-hardware-changes-compaq-deskpro-family-personal-computers-3527d0d/33.png)
Making Hardware Changes
2-23
2. Install two guide screws on each side of the drive
1
.
Some options use metric hardware. Extra guide screws
are provided on the front of the chassis, under the front
bezel. The Compaq-supplied metric screws are black.
3.
Install the drive in the desired drive bay by sliding it into
the front of the drive cage
2
; the drivelock automatically
secures the drive in the bay.
Be sure the guide screws line up with the guide slots in
the drive cage.
Aligning the Guide Screws and Installing an Optional 5.25-Inch Drive