Canon imageFORMULA DR-X10C II User Guide - Page 15
Use the SCSI cable to connect the scanner to the, computer., IMPORTANT
View all Canon imageFORMULA DR-X10C II manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
220 - 240 V Type 4 Use the SCSI cable to connect the scanner to the computer. DIP Switches Default Position (SCSI ID=2) • The DR-X10C scanner incorporates a SCSI terminator which is permanently set to ON. When using a daisy-chain configuration with other SCSI devices, make sure that the DR-X10C scanner is connected as the last device in the chain. Set the terminators of all other devices to OFF. IMPORTANT IMPORTANT Observe the following when connecting the scanner with other devices in a "daisy chain". • The SCSI ID of the scanner is set to "SCSI ID = 2" by default. When using a daisy-chain configuration with other SCSI devices, set the DIP switches so that SCSI ID numbers are not duplicated in the system. 15
15
4
Use the SCSI cable to connect the scanner to the
computer.
IMPORTANT
IMPORTANT
Observe the following when connecting the scanner with other
devices in a “daisy chain”.
• The SCSI ID of the scanner is set to “SCSI ID = 2” by default.
When using a daisy-chain configuration with other SCSI
devices, set the DIP switches so that SCSI ID numbers are not
duplicated in the system.
• The DR-X10C scanner incorporates a SCSI terminator which is
permanently set to ON. When using a daisy-chain configuration
with other SCSI devices, make sure that the DR-X10C scanner
is connected as the last device in the chain. Set the terminators
of all other devices to OFF.
220 - 240 V Type
DIP Switches
Default Position (SCSI ID=2)