Canon REALiS X600 User Manual - Page 38
Adjusting the Projection Angle, If Keystone Distortion is Too Large
View all Canon REALiS X600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
PROJECTING AN IMAGE FROM THE COMPUTER Adjusting the Projection Angle You can adjust the projection angle with the adjustable foot. 1 Lift the front side of the projector and push the adjusting foot lock button. The adjustable foot extends. 2 Adjust the projection angle while pushing the adjustable foot lock button, and then release the lock button. The adjustable feet is fixed. z With the adjustable foot, the projection angle can be adjusted up to 10 degrees. z If the projector is tilting in the lateral direction, use the rear adjustable feet on both sides to adjust its angle. You can adjust up to 10mm with one foot. If Keystone Distortion is Too Large Extending the adjustable foot too far causes keystone distortion. If the distortion is too large, adjust the height of the projector with a pedestal. The keystone distortion can be corrected with the Auto keystone function or by pressing the [KEYSTONE] button. (P41, 47, 60) Keystone Distortion 38 Pedestal