Canon REALiS LCOS WUX400ST MULTIMEDIA PROJECTOR WUX450 WX520 WUX400ST WX450ST - Page 54
Selecting an Input Signal, Step 2 Select an Input Signal
View all Canon REALiS LCOS WUX400ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Step 2 Select an Input Signal Selecting an Input Signal 1 Press the INPUT button to display the window shown below. Remote control Projector The currently active input signal is marked with a green circle and enclosed by a orange border. An input signal that is ready for projection is displayed in white. When no signal is received, it is displayed in gray. However, [Digital PC] or [Analog PC-1] may be displayed in gray even if these signals are ready for projection. 2 You can switch the available input signal types by pressing the INPUT button. • You can select the target input signal with [ ] / [ ]. 3 Press the OK button to confirm the input signal type. • Screens of computers connected to the projector over a network can be projected when you have selected [LAN] as the input signal. For details, refer to Networked MultiProjection (NMPJ). • Images on USB flash drives can be projected when you have selected [USB] as the input signal. For details, refer to "Projecting Images on a USB Flash Drive" (P79). • In split-screen mode, the side without control rights is identified by a white circle. 54