Canon REALiS LCOS WUX400ST MULTIMEDIA PROJECTOR WUX450 WX520 WUX400ST WX450ST - Page 129
Install Facing in the Correct Direction
View all Canon REALiS LCOS WUX400ST manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Installation and Maintenance Installation Before Installation ■ Install Facing in the Correct Direction The projector can be installed facing any direction*1, as shown below. However, projection upward ( ) or downward ( ) may shorten the useful life of the lamp. Installation in these orientations also requires projector settings adjustment. Specifically, for upward or downward projection, refer to instructions for [Vertical projection] (P152) in the [Install settings] menu. 10° 10° Upward projection: Inclination of the projector should be no more than 10° from the vertical axis.*2 10° 10° Downward projection: Inclination of the projector should be no more than 10° from the vertical axis.*2 If installing the projector on the floor Do not use the or hanging from the projector standing 10° ceiling, the left / right on its side. This may inclination of the damage the lamp. projector should be no 10° more than 10°.*2 *1 No optional accessories are available for installing the projector in ways other than ceiling installation (P39, P132, P305). *2 Failure to do so may damage the lamp. When installing the projector facing upward or downward, specify which way the projector is facing in [Install settings] > [Professional settings] > [Vertical projection]. (P152) 129