Canon REALiS 4K600STZ User Manual - Page 69
Selecting an Image Mode, Projecting an Image in the DICOM SIM Mode, IMAGE
![]() |
View all Canon REALiS 4K600STZ manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Basic Guide Projection Procedure Projection Procedure ■ Selecting an Image Mode Press the IMAGE button on the remote control to select. The image mode changes each time the IMAGE button is pressed. (The displayed image modes vary depending on the selected input signal.) Remote control Example: You can also select any image mode from the [Image mode] menu. (P98) • User settings 1 - 3 are displayed when the desired image settings have been created and stored using the user memory function in the image adjustment menu. (P98) Projecting an Image in the DICOM SIM Mode In the DICOM simulation mode (hereinafter referred to as "DICOM SIM"), this projector can project a monochrome medical image such as an X ray radiography, CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and Communications in Medicine) standard. Typically, to project the image according to the DICOM standard, it requires the grayscale tone correction using a luminance meter according to the environment. In this projector, there are 21 types of tone settings for various ambient lights. You can correct the tone in a simplified manner by selecting the DICOM test pattern (P197). It is suited to project an image in a medical lecture, academic conference, inhospital conference, etc. This projector is not the display monitor for a medical image. It cannot be used for the radiological image reading or medical examination. • It is recommended to check the tone everytime when using this projector since it does not have the tone correction and calibration functions against the secular change. • It may take approximately 30 minutes until the projection brightness of this projector becomes stabled. 69
![](/manual_guide/products/canon-realis-4k600stz-user-manual-d651c68/69.png)