Canon 9150A002 User Manual - Page 36
If you are using Windows XP, the [Found New Hardware Wizard] dialog, box appears.
View all Canon 9150A002 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2 Connecting to a Computer 2.3 Turning ON or OFF the Power ● If you are using Windows XP, the [Found New Hardware Wizard] dialog box appears. 1. Insert the setup disc into the computer's CD-ROM drive. 2. In the [Welcome to the Found New Hardware Wizard] screen, select [Install from a list or specific location (Advanced)], and then click the [Next] button. 3. Select [Search for the best driver in these locations], and then clear the [Search removable media (floppy, CD-ROM...)] check box. Select [Include this location in the search], enter "D:\INF" (assuming that "D" is assigned to your CD-ROM drive), and then click the [Next] button. 4. Click the [Continue Anyway] button in the [Hardware Installation] dialog box. 5. Click the [Finish] button in the [Completing the Found New Hardware Wizard] screen. ● Although a message appears in the [Hardware Installation] dialog box indicating that Note the driver "has not passed Windows logo testing," this is not a problem. ● The DR-7080C will be registered as "CANON DR-7080C SCSI" or "CANON DR-7080C USB" in the "Imaging Device" directory. ● Note that the SCSI connection device name is different from the USB connection device name. If you change from one type of connection to another, Windows will have to recognize the scanner again. The first time you turn ON the computer after changing the connection method, perform the device driver installation procedure from the beginning again. Important If you cancel device driver installation part way through, you will not be able to use the Job function. (See "Job Function," on p. 20.) Always perform the entire device driver installation procedure all the way to the end. 32