Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 7
General Description
![]() |
View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ENC10/12, ENC10/12R, ENC12/14, ENC14/16, ENC16/18, PWENC12/14, PWENC14/16, and PWENC16/18 1. General Description Environmental enclosures protect our dataloggers and peripherals from water and most pollutants. Our standard enclosures include the ENC10/12, ENC10/12R, ENC12/14, ENC14/16, and ENC16/18. For cable entry, Campbell Scientific offers a choice of one 1.5" diameter conduit, two horizontally-arranged 1.5" diameter conduits, two vertically-arranged 1.5" conduits (ENC16/18 only), or individual compression fittings. Multiple cables can use the conduit(s) whereas each cable uses a separate compression fitting. The individual compression fittings provide a more water-tight seal. Besides our standard enclosures, Campbell Scientific offers prewired enclosures that combine flexibility with ease of use. Prewired enclosures include the PWENC12/14, PWENC14/16, and PWENC16/18. Customers have the flexibility to choose their system components, but installation is easy because sensors are simply attached to prewired connectors on the outside of the enclosure. Most of the information provided in this manual pertains to the prewired enclosures. Prewired enclosures are shipped with the same enclosure supply kit (Section 2) and use the same brackets for mounting to a tripod or tower (Section 4). The maintenance information (Sections 5 and 6) is also applicable to our prewired enclosures. Campbell Scientific enclosures are manufactured with non-corrosive polyester and reinforced with fiberglass. These white UV-stabilized enclosures reflect solar radiation reducing temperature gradients inside the enclosure without requiring a separate radiation shield. A door gasket, external grounding lug, stainless steel hinge, and lockable hasp are included. Our enclosures were rated NEMA 6P before being modified to include conduit(s) or compression fittings. Dataloggers, peripherals, and brackets are mounted to an internal plate punched with a grid of one-inch-on-center holes. (The ENC10/12 and ENC10/12R have a grid of one-half-inch-on-center holes, allowing a CR1000 datalogger to be mounted horizontally within the enclosure.) An internal backplate is included with each ENC10/12, ENC10/12R, ENC12/14, and ENC14/16 enclosure. Two internal mounting plate options are offered for the ENC16/18. The -SB option provides a backplate similar to the one included with the other enclosures. The -EB option provides both a backplate and a sideplate. 1
![](/manual_guide/products/campbell-scientific-enc1012-enc1012-enc1214-enc1416-enc1618-enclosures-ad46e75/7.png)