Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 39
Appendix B., 28532 DIN-Rail Terminal Kits, B-4., Jumper installation
![]() |
View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Appendix B. 25458/28532 DIN-Rail Terminal Kits 2. Insert the 15909 Jumpers in the terminal strips as shown in FIGURE B-4. NOTE FIGURE B-4. 15909 Jumper installation 3. Mount the DIN-Rail bracket onto the enclosure backplate using two 505 screws and two 6044 grommets (see FIGURE B-5). The 28532 includes three screws and three grommets. Use the third screw and grommet to secure the 9-pin DIN-Rail at its center. FIGURE B-5. DIN-Rail bracket mounted onto an enclosure backplate B-3
![](/manual_guide/products/campbell-scientific-enc1012-enc1012-enc1214-enc1416-enc1618-enclosures-ad46e75/39.png)
Appendix B.
25458/28532 DIN-Rail Terminal Kits
2.
Insert the 15909 Jumpers in the terminal strips as shown in FIGURE B-4.
FIGURE B-4.
15909 Jumper installation
3.
Mount the DIN-Rail bracket onto the enclosure backplate using two 505
screws and two 6044 grommets (see FIGURE B-5).
The 28532 includes three screws and three grommets.
Use the
third screw and grommet to secure the 9-pin DIN-Rail at its
center.
NOTE
FIGURE B-5.
DIN-Rail bracket mounted onto an enclosure backplate
B-3