Campbell Scientific 10525 ENC10/12, ENC12/14, ENC14/16, ENC16/18 Enclosures - Page 29
Appendix A. Door Switch, A.1 Installation Procedure
![]() |
View all Campbell Scientific 10525 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Appendix A. Door Switch A.1 Installation Procedure 1. The Door Open Indicator Kit contains several small brackets that are used to mount the sensor and magnet to the enclosure case and door. Which brackets are used depends on the style of enclosure. Use the following guide to determine the proper brackets: a. The Door Open Indicator is mounted at the upper right corner of the enclosure. The enclosure DOOR determines which bracket is used to mount the sensor inside the enclosure CASE. If there is an offset near the edge of the enclosure door (see below), the sensor will be mounted with the brackets shown. Door Edge Weather Stripping Sensor Magnet Large Bracket Insert Sensor Door Edge Offset Weather Stripping Sensor Magnet No Offset Large Bracket b. If there is not an offset near the edge of the enclosure door, use the bracket as shown below. Small Bracket Sensor A-1
![](/manual_guide/products/campbell-scientific-enc1012-enc1012-enc1214-enc1416-enc1618-enclosures-ad46e75/29.png)