Brother International XR3240 Operation Manual - Page 43
Starting to sew
View all Brother International XR3240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Starting to sew Raise the needle by turning the handwheel a toward you (counterclockwise) so that the mark on the wheel points up, or raise the needle by pressing (needle position button) once or twice. While holding the end of the thread and the d fabric with your left hand, turn the handwheel toward you (counterclockwise) with your right hand to lower the needle to the starting point of the stitching. 2 or a Mark b Needle position button Raise the presser foot lever. b a Presser foot lever Place the fabric under the presser foot, pass c the thread under the presser foot, and then pull out about 5 cm (2 inches) of thread toward the rear of the machine. Lower the presser foot lever. e a Presser foot lever Slide the sewing speed controller to the left or f right to adjust the sewing speed. Refer to "Sewing speed controller" (page 15). a Sewing speed controller Slowly press down on the foot controller, or g press (start/stop button) once. a 5 cm (2 inches) or aStart/stop button X The machine starts sewing. 41