Brother International XR3240 Operation Manual - Page 107
List of symptoms
View all Brother International XR3240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
List of symptoms ■ Before sewing Symptom Possible cause How to put it right Reference The needle You have not moved the needle threader can not holder to its highest position. be used. Raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) once or twice. page 25 The needle is incorrectly installed. Correctly install the needle. page 32 The sewing light does not come on. The machine is not turned on. Turn on the machine. page 14 The thread is not passed through the bobbin-winding thread guide correctly. Correctly pass the thread through the bobbin-winding thread guide. page 19 Bobbin thread does not wind neatly on the bobbin. Bobbin spins slowly. Move the sewing speed controller to the right (so that the speed will be fast). page 21 4 The thread that was pulled out was not wound onto the bobbin correctly. Wind the thread that was pulled off round the bobbin five or six times clockwise. page 20 The thread does not pass through the eye of the needle. You have not moved the needle holder to its highest position. Raise the needle either by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) once or twice. page 25 The needle is incorrectly installed. Correctly install the needle. page 32 The needle threader lever does not lower to the correct position. The needle has not been raised to the correct position. Press the needle position button. page 25 While winding the bobbin, the bobbin thread was You have not wound the bobbin wound below the thread properly. bobbin winder seat. After removing the thread wound below the bobbin winder seat, wind the bobbin correctly. page 17 105