Brother International HL-L2340DW Command Reference Guide for Software Develope - Page 77
PCL - 57
View all Brother International HL-L2340DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
50 LPRINT ESC$+"(s3C"; 60 REM --- PRINT CHARACTERS ---70 FOR I=33 TO 127 80 LPRINT CHR$(I); 90 NEXT 100 LPRINT 110 REM --- FRENCH CHARACTER SET SELECTION -----120 LPRINT ESC$+"(s5C"; 130 REM --- PRINT CHARACTERS ---140 FOR I=33 TO 127 150 LPRINT CHR$(I); 160 NEXT 170 LPRINT 180 REM --- PAPER EJECT --190 LPRINT CHR$(12); 200 END 5.2.6. Selecting the type of character spacing Esc(s#P (27)(40)(115)#(80) # This command selects the spacing type for the primary font. Esc)s#P (27)(41)(115)#(80) # This command selects the spacing type for the secondary font. # = 0 selects fixed spacing and # = 1 selects proportional spacing. 10 REM ****** SELECTING A PROPORTIONAL OR FIXED SPACE FONT ****** 20 ESC$=CHR$(27) 30 WIDTH "LPT1:",255 40 REM --- SELECT A PROPORTIONALLY SPACED FONT ---50 LPRINT ESC$+"(s1P"; 60 FOR I=33 TO 127 70 LPRINT CHR$(I); 80 NEXT 90 LPRINT 100 REM --- SELECT A FIXED SPACE FONT --110 LPRINT ESC$+"(s0P"; 120 FOR I=33 TO 127 130 LPRINT CHR$(I); 140 NEXT 150 LPRINT 160 REM --- PAPER EJECT --170 LPRINT CHR$(12); 180 END 5.2.7. Selecting the pitch Esc(s#H (27)(40)(115)#(72) # This command designates the pitch for the primary font. Esc)s#H (27)(41)(115)#(72) # This command designates the pitch for the secondary font. # = the number of characters to be printed per inch. However, the actual size range is defined in combination with the character height. The printer's in-built bitmap fonts all have a pitch of either 10, 12 or 16.66 characters per inch, and you can specify any of these as follows: Esc&k0S Esc&k2S Esc&k4S ( 10 cpi ) ( 16.66 cpi ) ( 12 cpi ) CHAPTER 2 PCL - 57