Brother International HL-L2340DW Command Reference Guide for Software Develope - Page 347
Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset
View all Brother International HL-L2340DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 347 highlights
3.7. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Offset in the X-axis n = "xnnn" or "Xnnn" This parameter specifies the offset from the current print position in the "u"- or "U"-specified units. 3.8. Bar Code & Expanded Character Offset in the Y-axis n = "ynnn" or "Ynnn" This parameter specifies the downward offset from the current print position in the "u"- or "U"-specified units. 3.9. Bar Code, Expanded Character, Line, Block Drawing & Box Drawing Height n = "hnnn", "Hnnn", "dnnn", or "Dnnn" Default heights (1) EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), ISBN (UPC-E): (2) UPC-E: (3) Others: 22 mm 18 mm 12 mm Expanded characters 2.2 mm (default) Line Block Drawing & Box Drawing 1 dot This parameter specifies the height of bar codes or expanded characters as above. It can take the prefix "h", "H", "d", or "D". The height is specified in the "u"- or "U"-specified units. Note that the default setting of the bar code height (12 mm, 18 mm or 22 mm) is subject to the bar code mode selected by "t" or "T". 3.10. Expanded Character, Line Block Drawing & Box Drawing Width (except HLL5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300DW/L6400DW/L8250CDN/L8350CDW/L9200CDW /L9300CDW/L2370DN/L2371DN/L2372DN/2590DN/B2050DN/L2370DW/L2375DW/L2376DW/B2080DW/ L2385DW/L2386DW/2595DW/L3270CDW/L3230CDW/L3230CDN/L3210CW/3190CDW/3160CDW) n = "wnnn" or "Wnnn" Default widths Expanded character 1.2 mm Line Block Drawing & Box Drawing 1 dot This parameter specifies the width of expanded characters in the selected units as above. 3.11. Expanded Character Rotation (except HLL5000D/L5580D/L5100DN/L5200DW/L6200DW/L6300DW/L6400DW/L8250CDN/L8350CDW/L9200CDW /L9300CDW/L2370DN/L2371DN/L2372DN/2590DN/B2050DN/L2370DW/L2375DW/L2376DW/B2080DW/ L2385DW/L2386DW/2595DW/L3270CDW/L3230CDW/L3230CDN/L3210CW/3190CDW/3160CDW) n = "a0" or "A0" Upright (default) n = "a1" or "A1" Rotated 90 degrees clockwise n = "a2" or "A2" Upside down, rotated 180 degrees clockwise n = "a3" or "A3" Rotated 270 degrees clockwise CHAPTER 8 BAR CODE CONTROL - 8