Black & Decker HSVJ520JMBF27 Instruction Manual - Page 5

F I POWERBOOST mode The green LED will illuminate when the appliance is in POWERBOOST mode. The vacuum will operate at a higher suction level to pick up debris that requires more power. FILTERSENSE Whenever a filter is blocked and needs cleaning, the red LED in the handle will illuminate. Clean dust from filter (See "Cleaning the Dust Bowl and Filter" section). Rotary brush To engage the rotary brush inside the floor head (16), depress the rotary brush on/off button (13) as shown in Figure G. G AUTOSENSE The appliance is fitted with a unique floor sense feature. It will automatically switch between low and high mode when you are vacuuming between a hard floor and a thick pile carpet. • To operate the floor sense feature, depress the power button (1 or 12) once. The feature will automatically detect the service that is being vacuumed. NOTE: Once the power button is depressed twice, the vacuum will only operate in BOOST mode. Removing and clearing the beater bars • Depress the beater bar release button (18) as shown in Figure J. J 18 Nozzle / Accessories • A crevice tool (4) is built into the nozzle (3). Extend the crevice tool as shown in Figure H, until it clicks in place. • To shorten the crevice tool, depress the crevice tool release button (5) as shown in Figure I and slide the crevice tool into the nozzle. • The brush tool (11) can be fitted into the nozzle for dusting and upholstery cleaning. H • The rotary brush (19) can now be removed. The end pieces are removable, allowing you to clear the brushes from any hair or other debris that has accumulated during use (Figure K). K 19 5