BenQ SW270C User Manual - Page 19
Connect the PC video cable, To Connect the DP Cable
View all BenQ SW270C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
2. Connect the PC video cable To Connect the HDMI Cable Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device. To Connect the DP Cable Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket. After the monitor and the computer are powered on, if the image is not displayed, disconnect the DP cable. Connect the monitor to any video source other than DP first. Go to System and DisplayPort on the OSD menu of the monitor and change the setting from 1.4 to 1.1. Once the setting is done, unplug the current video cable and re-connect the DP cable. To go to the OSD menu, see Basic menu operation on page 45. To Connect the USB-C™ Cable Connect the plug of the supplied USB-C™ cable to the USB-C™ port on the monitor. Connect the other end of the cable to the USB-C™ port of a laptop. It allows signal, audio, and data transmission from the laptop to the monitor. (SW271) The USB-C™ port on the monitor transfers data only and does not support power delivery to the laptop. Additional power supply to the connected laptop is required. (SW270C) The USB-C™ port on the monitor supports power delivery. See Power delivery of USB-C™ port on your monitor (SW270C only) on page 16 for more information. If a USB-C™ cable is not included in the product package, make sure the purchased cable is certified by USB-IF and is full-featured, with power delivery and video / audio / data transfer functions. Due to USB-C™ technology limitation, the USB transmission speed is determined only by the selected refresh rate. See USB-C Configuration on page 65 and Options for data transfer via USB-C™ (SW271 / SW270C only) on page 67 for more information. Either Or Or How to assemble your monitor hardware 19