BenQ BenQ HT1075 Full HD 3D Wireless Projector User Manual - Page 51
Timing of replacing the lamp, Status, Message
View all BenQ BenQ HT1075 Full HD 3D Wireless Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Timing of replacing the lamp When the Lamp indicator lights up red or a message appears suggesting it is time to replace the lamp, please install a new lamp or consult your dealer. An old lamp may cause a malfunction in the projector and in some instances the lamp may explode. Go to http://www.BenQ.com for a replacement lamp. The Lamp indicator light and Temperature warning light will light up if the lamp becomes too hot. Turn the power off and let the projector cool for 45 minutes. If the Lamp or Temp indicator still lights up after turning the power back on, please contact your dealer. See Indicators for details. Please replace the lamp when the following lamp warning messages appear. The illustrations show the examples of messages you will see under the Advanced menu. They are for reference only and may differ from the actual design and the menu type you've selected. Status Install a new lamp for optimal performance. If the projector operates normally in Economic mode (see Getting to know the lamp hour), you may continue operating the projector until the next hour lamp warning appears. Press OK to dismiss the message. Message WARNING NOTICE: Order replacement lamp Lamp > XXXX hrs Order a new lamp at www.benq.com OK We strongly recommend you to replace the lamp at this stage. The lamp is a consumable item. The lamp brightness diminishes with use. This is normal lamp behavior. You can replace the lamp whenever you notice that the brightness level has significantly diminished. Press OK to dismiss the message. WARNING NOTICE: Replace lamp soon Lamp > XXXX hrs Order a new lamp at www.benq.com OK The lamp MUST be replaced before the projector will operate normally. Press OK to dismiss the message. WARNING NOTICE: Replace lamp now Lamp > XXXX hrs Lamp-usage time exceeded Replace lamp (refer to User's Manual) then reset lamp timer. Order a new lamp at www.benq.com OK "XXXX" shown in the above messages are numbers that vary depending on different models. Maintenance 51