BenQ BenQ HT1075 Full HD 3D Wireless Projector User Manual - Page 36
Picture menu, Submenu, Functions and Descriptions
View all BenQ BenQ HT1075 Full HD 3D Wireless Projector manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Picture menu Submenu Functions and Descriptions Selects a preset picture mode to suit your operating environment and input signal picture type. Picture Mode The preset picture modes are described as below: • Bright: Maximizes the brightness of the projected image. This mode is suitable for environments where extra-high brightness is required, such as using the projector in well lit rooms. • Cinema: With well-balanced color saturation and contrast with a low brightness level, this is most suitable for enjoying movies in a totally dark environment (as you would find in a commercial cinema). • Standard: Being slightly brighter than Cinema mode, it is suitable for use in rooms where there is a small amount of ambient light. • 3D: It is optimized to bring up 3D effects when watching 3D contents. This mode is only available when 3D function is enabled. • User 1/User 2: Recalls the customized settings. See User Mode Management for more details. The function is accessible through the remote control. The functions are only available when Picture Mode is set to User 1 or User 2. • Load Settings From Allows you to manually adjust a preset picture mode and make it an available option on the picture mode list. User Mode Management 1. Go to the Picture > Picture Mode menu, select User 1 or User 2. 2. Press to select User Mode Management. 3. On the User Mode Management window, select Load Settings From and press OK. 4. Press to select a picture mode that is close to your need. 5. When done, press OK and BACK to return to the Picture menu. 6. Press to select other submenus you want to make changes and use / to adjust the values. The adjustments define the selected user mode. • Rename User Mode Selects to rename the customized picture modes (User 1 or User 2). Brightness 1. Go to the Picture > Picture Mode menu, select User 1 or User 2. 2. Press to select User Mode Management. 3. On the User Mode Management window, select Rename User Mode and press OK. 4. On the Rename User Mode window, use characters for the selected mode. 5. When done, press OK and BACK to exit. /// to select desired Adjusts the brightness of the picture. When adjusting this control, the black areas of the picture appear just as black and details in the dark areas are visible. The higher the value, the brighter the picture, while the lower the value, the darker the picture. 30 50 70 The function is accessible through the remote control. 36 Menu Functions