Asus A7M266 A7M266 User Manual - Page 26
Memory Installation, General DIMM Notes
View all Asus A7M266 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. HARDWARE SETUP 3.5.1 General DIMM Notes • DIMMs that have more than 18 chips are not supported on this motherboard. • For the system CPU bus to operate at 200MHz/266MHz, use only PC1600-/ PC2100-compliant DIMMs. • ASUS motherboards support SPD (Serial Presence Detect) DIMMs. This is the memory of choice for best performance vs. stability. • BIOS shows SDRAM memory on bootup screen. • Single-sided DDR DIMMs come in 64, 128, and 256MB; double-sided come in 128, 256, and 512MB. WARNING! Be sure that the DIMMs you use can handle the specified DDR SDRAM MHz or else bootup will not be possible. 3.5.2 Memory Installation WARNING! Make sure that you unplug your power supply when adding or removing memory modules or other system components. Failure to do so may cause severe damage to both your motherboard and expansion cards (see 3.3 Hardware Setup Procedure for more information). Insert the module(s) as shown. Because the number of pins are different on either side of the breaks, the module will only fit in the orientation shown. A 184-pin DDR SDRAM DIMM has a single notch slightly to the right of center. 3. H/W SETUP System Memory 01 01 A7M266 ® A7M266 184-Pin DDR DIMM Sockets This motherboard supports three pairs of differential clock signals per DIMM. 26 ASUS A7M266 User's Manual