Adaptec 5405Z User Guide - Page 21

Chapter 2: Using the Command Line Utility ● 21 arcconf setconfig Resets the controller's configuration. Logical drives are deleted, hard disks are reset to the READY state, and any controller settings are reset to default values. Syntax ARCCONF SETCONFIG DEFAULT [noprompt] Parameters Controller# is the controller number Default restores the controller 's default configuration. Noprompt: No prompt for confirmation. Example ARCCONF SETCONFIG 1 DEFAULT arcconf setmaxiqcache Enables/disables MaxIQ caching for a logical drive, adds a Solid State Disk (SSD) to the MaxIQ pool, removes an SSD from the MaxIQ pool. Note: Before you can enable the MaxIQ cache, you must assign at least one SSD to the MaxIQ pool. Additionally, regular read caching must also be enabled (see page 20). Syntax ARCCONF SETMAXIQCACHE ENABLE|DISABLE ARCCONF SETMAXIQCACHE ADDTOPOOL|REMOVEFROMPOOL ... Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive Channel# is the channel number for the SSD Device# is the device number for the SSD Example ARCCONF SETMAXIQCACHE 1 ENABLE 1 ARCCONF SETMAXIQCACHE 1 ADDTOPOOL 0 1 ARCCONF SETMAXIQCACHE 1 REMOVEFROMPOOL 0 1 0 2 arcconf setname Renames a logical drive. Syntax ARCCONF SETNAME LOGICALDRIVE Parameters Controller# is the controller number LogicalDrive# is the number of the logical drive to be renamed New Name is the new name of the logical drive