Adaptec 2820SA User Guide - Page 60
Terminology Used in This What is SAS?, How is SAS Different from Parallel SCSI?
UPC - 760884148969
View all Adaptec 2820SA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Chapter A: Introduction to Serial Attached SCSI (SAS) ● 60 Terminology Used in This Chapter For convenience, SAS HBAs and SAS RAID controllers are referred to generically in this chapter as SAS cards. HBAs, RAID controllers, disk drives, and external disk drive enclosures are referred to as end devices and expanders are referred to as expander devices. For convenience, this chapter refers to end devices and expander devices collectively as SAS devices. What is SAS? Legacy parallel SCSI is an interface that lets devices such as computers and disk drives communicate with each other. Parallel SCSI moves multiple bits of data in parallel (at the same time), using the SCSI command set. Serial Attached SCSI (SAS) is an evolution of parallel SCSI to a point-to-point serial interface. SAS also uses the SCSI command set, but moves multiple bits of data one at a time. SAS links end devices through direct-attach connections, or through expander devices. SAS cards can typically support up to 128 end devices and can communicate with both SAS and SATA devices. (You can add 128 end devices-or even more-with the use of SAS expanders. See page 64.) Note: Although you can use both SAS and SATA disk drives in the same SAS domain (see page 64), Adaptec recommends that you not combine SAS and SATA disk drives within the same array or logical drive. The difference in performance between the two types of disk drives may adversely affect the performance of the array. Data can move in both directions simultaneously across a SAS connection (called a link-see page 61). Link speed is 600 MB/sec in full-duplex mode. A SAS card with eight links has a maximum bandwidth of 4800 MB/sec in full-duplex mode. Although they share the SCSI command set, SAS is conceptually different from parallel SCSI physically, and has its own types of connectors, cables, connection options, and terminology, as described in the rest of this chapter. To compare SAS to parallel SCSI, see How is SAS Different from Parallel SCSI? on page 65.